/CaribouCartesian

CaribouMK3s and CaribouDuet plastic parts

Primary LanguageG-codeOtherNOASSERTION

CaribouCartesian Printers

Introduction

Welcome to the Caribou github project page!

CaribouCartesian printers come in two flavours: CaribouDuet and Caribou-MK3S+. They're both based on many similar or same plastic parts. The parts have now been integrated into one project. This is Release 4.0 of the parts.

Caribou printers come in three standard print heights: 220mm, 320mm, and 420mm (the real print height depends on the exruder, hotend, and nozzle). They are available as assmebled printers, full-kits, and upgrade kits. You can also mod your Original Prusa printers to Caribou 220, Caribou 320, and Caribou 420 with upgrade kits. Numbers are indicating the print height. They are all featuring 3030 aluminium extrusions and improved plastic parts for rigidity, accuracy and speed. The three mods are almost identical except the Z-Axis motors, extrusions, and rods. You need longer lead screws for 320 and 420 builds and you can buy identical quality stepper motors from caribou3d.com which have been used on the Original Prusa MK series.

Special thanks to all our members for the contribution as the project is growing within an exceptionally friendly and courteous platform. 🙏

Where to buy

Caribou3d.com is the webshop for high-quality genuine parts you may need for your builds including heated beds, motors, screws, nuts, controller boards and even extruder springs.

Caribou3d.com only sells tested, high-quality genuine items from Bondtech, E3d, Microswiss, Slice Engineering, LDO, Misumi, Meanwell, and many more...

Thanks

There are many people who have contributed on one form or another to the project. We like to thank everybody who inspired or supported us. Many ideas were discussed in the facebook groups and other channels of communication:

Official Caribou Facebook Group: https://www.facebook.com/groups/caribou3d

German Caribou Group: https://www.facebook.com/groups/caribou3dde

Instagram: https://www.instagram.com/caribou3d/

Twitter: https://twitter.com/caribou3d

Discord Deutsch: https://discord.gg/HJkc6VYEu2

Discord Englisch: https://discord.gg/FxYT73Pz3D

Manuals: https://caribou3d.dozuki.com/

Very special thanks to 3d-Gussner, Bernd Brinkert, and Daniel Heimbeck for their huge support and effort in providing and testing Caribou firmware.

Thank you Rebecca and Jason from LDO Motors and Martin from Bondtech for the quality manufacturing and relationship.

Thanks to our other suppliers: E3d, Microswiss, Slice Engineering, Misumi for delivering high quality products to us.

Sources

We give references that have influneced the design. Since the majority of plastic parts (even if much improved and somehow "new and different") have their roots in the initial design by Prusa Research we like to mention this as first and most influential reference.

Frame

LGX-Mosquito Extruder

BL-Touch Holder

  • Design by Michael Müller. Thanks for providing the STEP file

Fan ducts for Bondtech (E3d, Mosquito), LGX-Mosquito, LGX-Copperhead

y-Rod Holder:

y-Bearing Holder

  • the clamp mechanism is similar to one used on the x-axis. We like to mention that the first clamp design with insert for the carriage for the bearings holders was done by Vecko Kojchevski https://www.thingiverse.com/thing:2930007

x-MotorHolder and X-Idler

x-Carriage

z-Top Holder

z-Motor Holder:

Meanwell PSU-Holder

Delta PSU-Holder

  • Peter Baltin (03.10.20229)

Extruder of Rel. 2 that still can be used instead of the Bondtech extruder

STL and SVG for PrusaSlicer for MKx, Klipper,and Mosaic as background

  • thanks to Patrick Vosshans

Mosquito PFTE cutting tools

Large Spool Holder Left & Right

  • Thanks Tom Marshall for developing, testing, and sharing the STL and STEP files

Double Bowden Extension

  • Thanks Karl Schömer for developing and sharing the STEP and STL files

Earlier Releases were partly designed by or influenced by: