Dhondtguido/CalculiX

Issues

• EVOL doesn't change with deformation

  #73 opened 10 months ago by FEA-eng
  0

• Slender beams go wrong with Pastix

  #51 opened a year ago by victorkemp
  3

• Truss and beam elements disconnected

  #14 opened 2 years ago by victorkemp
  2

• Invalid value for *SECTION PRINT

  #71 opened 10 months ago by 3rav
  1

• Error with *CONDUCTIVITY,TYPE=ORTHO and *SECTION PRINT

  #70 opened 10 months ago by 3rav
  1

• Wrong displacement for beam with a single rotational DOF constraint.

  #69 opened a year ago by victorkemp
  0

• Bug for US3 element in *STEADY STATE DYNAMICS

  #68 opened a year ago by GiuCre
  2

• Bug: *TEMPERATURE and 2 STEPS (2.20 OK, 2.21 error)

  #67 opened a year ago by 3rav
  0

• Inconsistent result with CalculiX on a shell model of a plate in bending

  #64 opened a year ago by tcoff27
  17

• Spurious deformation of B32 and B32R ends with *CLOAD or *BOUNDARY.

  #15 opened 2 years ago by victorkemp
  1

• possible bugs in *Equation and remove (Beam element)

  #66 opened a year ago by xyont
  1

• The need for a CalculiX documentation repository

  #65 opened a year ago by FEA-eng
  0

• Initial velocity is not transferred to the expanded nodes in dynamic analyses

  #63 opened a year ago by FEA-eng
  0

• *NODE PRINT / *EL PRINT impacting dat file output of subsequent steps

  #61 opened a year ago by dgiljohann
  0

• Status file output in explicit dynamics

  #58 opened a year ago by FEA-eng
  1

• Rigid body constraint doesn't work with shell, axisymmetric and plane stress/strain elements in explicit dynamics

  #59 opened a year ago by FEA-eng
  0

• Dynamic , Explicit. Material wave propagation & Courant number in mmgs units

  #60 opened a year ago by disla2
  0

• Changes in *BUCKLE definition

  #57 opened a year ago by lucas-bueno777
  1

• BUG: CONTACT ELEMENTS breaks displacement on composites.

  #56 opened a year ago by victorkemp
  0

• *restart, write + overlay bug

  #55 opened a year ago by disla2
  0

• Contact element file jobname.cel truncated to 33 characters.

  #54 opened a year ago by victorkemp
  0

• Non-linear SPRING1 elements not identified

  #52 opened a year ago by dgiljohann
  0

• *ERROR in cascade for *BOUNDARY on rotated rectangular beam.

  #37 opened a year ago by victorkemp
  2

• _set_output_format(_TWO_DIGIT_EXPONENT); doesn't compile in MinGW64

  #50 opened a year ago by victorkemp
  0

• CYCLIC SYMMETRY MODEL parameter NGRAPH behavior

  #32 opened a year ago by OliverKunc
  4

• *ERROR in cascade for *BOUNDARY on rotated rectangular beam with 3 DOFs constrained.

  #40 opened a year ago by victorkemp
  1

• Strain Energy density Neo Hookean / Mooney Rivlin

  #35 opened a year ago by disla2
  1

• NGRAPH doesn’t work properly for the second cyclic symmetry definition

  #33 opened a year ago by FEA-eng
  1

• Bug: Wrong angle for dynamic beam rotation

  #42 opened a year ago by victorkemp
  0

• Bug: Wrong displacement on shell midplane node with transformed *BOUNDARY

  #43 opened a year ago by victorkemp
  0

• Element definition (eg. Type=Mass, Type=T3D2) in combination with composite option on *shell section card (*ERROR in changekon)

  #19 opened 2 years ago by hkuhl
  4

• CalculiX and base PaStiX

  #12 opened 2 years ago by 3rav
  1

• Addition of rotation around local axis for *ORIENTATION, SYSTEM=CYLINDRICAL

  #36 opened a year ago by lucas-bueno777
  0

• Tie constraint fails in a shell model with *Cload applied to the slave nodes

  #34 opened a year ago by FEA-eng
  0

• T3D3 too soft

  #30 opened 2 years ago by victorkemp
  0

• *ERROR reading *SOLID SECTION: normal in direction 1 has zero size

  #29 opened 2 years ago by victorkemp
  0

• CalculiX and clang (mingw)

  #25 opened 2 years ago by 3rav
  0

• Formula error on the manual.

  #22 opened 2 years ago by disla2
  2

• Posible error on Manual formula 363 and 364 ccx manual 2.20

  #23 opened 2 years ago by disla2
  2

• PARDISO Iterative solver?

  #20 opened 2 years ago by 3rav
  1

• ELSET length limit when used in BEAM SECTION

  #4 opened 2 years ago by ramcdona
  2

• *ERROR in cascade: zero coefficient... with *BOUNDARY on B31

  #18 opened 2 years ago by victorkemp
  0

• Zero velocity on B31 node

  #17 opened 2 years ago by victorkemp
  0

• Wrong external force on B31

  #16 opened 2 years ago by victorkemp
  0

• Wrong results in a multistep analysis with shells and *BOUNDARY, OP=NEW

  #13 opened 2 years ago by FEA-eng
  0

• Truss and shell connection overconstrained

  #11 opened 2 years ago by victorkemp
  0

• -DLONGLONG and msys2/mingw

  #1 opened 2 years ago by 3rav
  1

• Beam elements not constructed properly when using NORMAL

  #3 opened 2 years ago by ramcdona
  0