Voron_Sub_0-70

$${\color{cyan}Honey \space \color{cyan}I \space \color{cyan}shrunk \space \color{cyan}the \space \color{cyan}V0!}$$

This is my own version of the Famous Voron Sub 0 created by ICARUS from the Voron Design Team. After seeing it on a Video at the RMRRF I knew i had to build one, but as this was a showcase build for the RMRRF stall there was no CAD anywhere for it. So that led me to create my own CAD and work on getting all the small details done to make it as complete a build as possible.

For this I chose to go slightly bigger with the build volume coming in at a whopping 42 x 42 x 42mm

It uses MGN7H carriages and a 70mm rail. These can be found on Ali express. - Link in the BOM

The power supply is a AC/DC computer power brick providing 24vdc - 6Amps through a 5.5mm jack plug (where you would normally plug in the mains) Plans are afoot to have an integrated power supply and mini mains plug!

The RPI and BTT Pico are mounted on standoff's and nestle neatly in the back of the printer.

The Nema 14's have been changed to 42mm versions to help with room in the electronics enclosure.

The Mini Kirigami Bed is now printed as it is sooo small now, it should be more than stiff enough for the tiny build volume.

Note

Most of the printed parts are standard V0.2r1's - Custom parts have been added to a separate folder.

$${\color{red}A \space \color{red}BIG \space \color{red}THANKYOU \space \color{red}TO \space \color{red}THE \space \color{cyan}VORON \space \color{red}DESIGN \space \color{red}TEAM \space \color{red}AND \space \color{red}THEIR \space \color{red}AWESOME \space \color{red}WORK}$$

Links to original source material

https://www.youtube.com/watch?v=Xj9trzbbwb8

https://github.com/VoronDesign/Voron-0

https://vorondesign.com

https://github.com/MapleLeafMakers/Stealth_Bed_Front

https://github.com/christophmuellerorg/voron_0_kirigami_bed

https://github.com/hartk1213

$${\color{red}SPECIAL \space \color{red}THANX \space \color{red}TO \space \color{cyan}LIVINHACK \space \color{red}WHO \space \color{red}COLLABORATED \space \color{red}IN \space \color{red}THIS \space \color{red}PROJECT \space \color{red}AND \space \color{red}HELPED \space \color{red}GIVE}$$

$${\color{red}FINAL \space \color{red}TOUCHES \space \color{red}AND \space \color{red}SOME \space \color{red}AWESOME \space \color{red}MODS}$$

https://github.com/livinhack

THIS IS STILL A WORK IN PROGRESS SO SOME FEATURES MIGHT NOT BE FULLY FINALISED YET

CHANGE LOG

Main CAD updated - new electronic mount for more secure fixing and optimised possition

Standard V0 STL's corrected to only show needed parts

Custom Sub 0 STL's added - These parts are required to build your Sub 0

Klipper Expander Mount Updated - USB Cable cut out added

Belted Z Mod added to Mod folder

Some STL's added to Mods in Mods Folder

Driftrotor/Voron_V-SUB_0-70

Voron_Sub_0-70

THIS IS STILL A WORK IN PROGRESS SO SOME FEATURES MIGHT NOT BE FULLY FINALISED YET