Issues
- 0
Can sx1278 433m works
#70 opened by DusKing1 - 3
Improve radio sleep/wake/receive/transmit cycle
#40 opened by DzikuVx - 0
PCB
#65 opened by SwiftFlying - 1
increase power RF
#69 opened by mikerc2017 - 5
Issues on M0
#66 opened by kadrim - 1
- 1
Enable OLED only on button
#31 opened by DzikuVx - 0
sbus decoding should timeout
#52 opened by DzikuVx - 1
Improve TX module indication
#37 opened by DzikuVx - 0
- 1
Frame length should be hardcoded
#44 opened by DzikuVx - 5
Add CRSF support on the TX module
#21 opened by DzikuVx - 4
Which libraries do you use?
#45 opened by unitware - 1
Latest master PPM reading not stable
#30 opened by DzikuVx - 0
S.Bus input for TX module
#24 opened by DzikuVx - 1
Improve RC_DATA frame performance
#38 opened by DzikuVx - 0
LoRa transmitting should not be blocking
#39 opened by DzikuVx - 0
Change RSSI scaling
#36 opened by DzikuVx - 0
No RSSI output on RX module
#32 opened by DzikuVx - 0
CRSF should use 400kbps not 420kbps
#29 opened by DzikuVx - 2
RF settings description
#28 opened by dontsovcmc - 0
Some kind of alarm when RSSI goes LOW
#3 opened by DzikuVx - 0
Detect Failsafe state on TX side
#14 opened by DzikuVx - 0
- 0
Use slots for transmitting and receiving
#8 opened by DzikuVx - 0
Remove PacketID from QSP frame
#15 opened by DzikuVx - 0
- 0
- 0
Inject RSSI as one of output PPM channels
#12 opened by DzikuVx - 0
Get rid of Serial mode, it does not makes sense
#20 opened by DzikuVx - 0
SBUS output from RX module
#13 opened by DzikuVx - 0
- 0
Verify PPM output on RX module
#17 opened by DzikuVx - 0
- 0
Verify PPM input on TX module
#16 opened by DzikuVx - 0
ability for RX and TX to change frequency
#4 opened by DzikuVx - 0
Lost model alarm on RX module
#11 opened by DzikuVx - 0
- 0
- 0
RX_HEALTH encoding and decoding
#7 opened by DzikuVx - 0
Telemetry feedback from RX to TX
#2 opened by DzikuVx - 0
serial passtrough (?)
#5 opened by DzikuVx