Pinned Repositories
Beelan-LoRaWAN
A LoRaWAN library for compatible arduino board
BomberCat
BomberCat is the latest security tool that combines the most common card technologies: NFC technology (Near Field Communication) and magnetic stripe technology used in access control, identification, and banking cards. Specially created to audit banking terminals, and identify NFC readers and sniffing tools, with this tool you can audit
CatSniffer
CatSniffer is an original multiprotocol and multiband board for sniffing, communicating, and attacking IoT (Internet of Things) devices using the latest radio IoT protocols. It is a highly portable USB stick that integrates TI CC1352, Semtech SX1262, and an RP2040 for V3 or a Microchip SAMD21E17 for V2
CayenneLPP
Library for Arduino compatible with Cayenne Low Power Payload
DAP-Cat-Programmer
An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH552, low-cost of $3 dollars
electroniccats-cla
ElectronicCats Contributor License Agreement Information
HunterCatNFC
The Hunter Cat NFC is the latest security tool for contactless (Near Field Communication) used in access control, identification and bank cards. Specially created to identify NFC readers and sniffing tools, with this tool you can audit, read or emulate cards of different types.
magspoof
MagSpoof is a portable device that can spoof/emulate any magnetic stripe or credit card "wirelessly", even on standard magstripe readers.
mpu6050
MPU6050 Arduino Library
NFC-Copy-Cat
NFC Copy Cat is a small device that combines two powerful cybersecurity tools, NFCopy and MagSpoof. NFCopy works by reading or emulating a NFC card; depending on the necessities of the researcher.
ElectronicCats's Repositories
ElectronicCats/CatSniffer
CatSniffer is an original multiprotocol and multiband board for sniffing, communicating, and attacking IoT (Internet of Things) devices using the latest radio IoT protocols. It is a highly portable USB stick that integrates TI CC1352, Semtech SX1262, and an RP2040 for V3 or a Microchip SAMD21E17 for V2
ElectronicCats/mpu6050
MPU6050 Arduino Library
ElectronicCats/Beelan-LoRaWAN
A LoRaWAN library for compatible arduino board
ElectronicCats/HunterCatNFC
The Hunter Cat NFC is the latest security tool for contactless (Near Field Communication) used in access control, identification and bank cards. Specially created to identify NFC readers and sniffing tools, with this tool you can audit, read or emulate cards of different types.
ElectronicCats/CayenneLPP
Library for Arduino compatible with Cayenne Low Power Payload
ElectronicCats/BomberCat
BomberCat is the latest security tool that combines the most common card technologies: NFC technology (Near Field Communication) and magnetic stripe technology used in access control, identification, and banking cards. Specially created to audit banking terminals, and identify NFC readers and sniffing tools, with this tool you can audit
ElectronicCats/DAP-Cat-Programmer
An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH552, low-cost of $3 dollars
ElectronicCats/magspoof
MagSpoof is a portable device that can spoof/emulate any magnetic stripe or credit card "wirelessly", even on standard magstripe readers.
ElectronicCats/CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
ElectronicCats/flipper-shields
Flipper shield addons by Electronic Cats
ElectronicCats/ElectronicCats-PN7150
Arduino library for I2C access to the PN7150 RFID/Near Field Communication chip
ElectronicCats/faultycat
Faulty Cat is a low-cost Electromagnetic Fault Injection (EMFI) tool, designed specifically for self-study and hobbiest research.
ElectronicCats/MeowMeow
Using the Meow Meow you can make anything into a key just by connecting a few alligator clips
ElectronicCats/Cat-Sink
A USB-C PD Sink up to 20V 5A based on the Cypress CYPD3177 USB PD Controller
ElectronicCats/CatSniffer-Tools
HUB repository for all the Catsniffer Tools available maintaned by Electronic Cats
ElectronicCats/ArduinoCore-samd
Arduino support for SAM D|L|C (M0+ and M4F). It adds support for new devices like the D51, SAMR34, L21, C21, and D11. It also adds new clock sources, like a high speed crystal or internal oscillator.
ElectronicCats/flipper-rs485modbus
ModBus RTU for Flipper Zero
ElectronicCats/flipper-SX1262-LoRa
SX1262 LoRa project to the Flipper Zero
ElectronicCats/CatSniffer-Firmware
HUB repository for all the Catsniffer Firmware code available maintaned by Electronic Cats
ElectronicCats/ATECC608A-Croquette
Electronic Croquette Cats ATECC608 Breakout Board Cryptographic co-processor with secure hardware-based key storage
ElectronicCats/flipper-MCP2515-CANBUS
MCP2515 CANBUS project to the Flipper Zero
ElectronicCats/Bast-Pro-Mini-M0
Bast Pro Mini M0 Dev Board for SAMD21E18A
ElectronicCats/CatWANShield
LoRaCat Shield for Arduino
ElectronicCats/pawprotector
Protects your mobile data from being accidentally shared, stolen, or infected with malware
ElectronicCats/michi
Using the Michi you can make anything into a key just by connecting a few alligator clips
ElectronicCats/Badge-BugCON2023
Badge Oficial BugCON 2023
ElectronicCats/ESP32_nRF52_SWD
This software brings you the possibility to Read and Write the internal Flash of the Nordic nRF52 series with an ESP32
ElectronicCats/Template-Firmware
ElectronicCats/tinytapeout_www
website source
ElectronicCats/tutorials