ElectronicCats/mpu6050

Issues

• Mpu6050 freezes on demo sketch

  #91 opened a month ago by Vespertilo
  3

• ADC resolution

  #89 opened 2 months ago by stefcarpi
  1

• ElectronicCats, switch initialize method

  #87 opened 3 months ago by stefcarpi
  3

• MPU6050 connection failed but showing DMP results!

  #85 opened 3 months ago by Sinamajidi
  12

• Can i change the interrupt pin?

  #84 opened 7 months ago by Fed-3
  7

• Deadlock upon calibration if no Serial available

  #63 opened a year ago by iiiCpu
  2

• The DEBUG build no longer compiles

  #80 opened 10 months ago by benpeart
  4

• Gyroscope

  #76 opened a year ago by Navaneeth272001
  8

• Initialization in z-axis reversal leads to P reversal in PID for pitch and roll

  #77 opened a year ago by Zhaosn
  1

• is OUTPUT_READABLE_YAWPITCHROLL display Euler angles in degrees conversion correct?

  #74 opened a year ago by mw66
  15

• Doc [enhancement]: Open the processing sketch (Teapot).

  #73 opened a year ago by mw66
  3

• MPU6050 getting stuck in FIFO Loop

  #16 opened a year ago by tonyvr4
  17

• Support for GIGA R1 WiFi with 3 x I2C

  #64 opened a year ago by megacct
  3

• Changing sensors in code on lsm303dlh and l3gd20

  #65 opened a year ago by brightproject
  4

• ElectronicCats

  #66 opened a year ago by Bojarin-Jr
  4

• ElectronicCats

  #62 opened a year ago by KrisKasprzak
  1

• Wrong reading when the MPU6050 is placed vertically

  #54 opened 2 years ago by Juno-cyber
  5

• MPu6050 register map revision dont have all registers

  #60 opened a year ago by linxcow
  1

• i get stuck in Success! DMP code written and verified

  #56 opened 2 years ago by IamEden94
  6

• Reading problem when placing the mpu6050 vertically

  #55 opened 2 years ago by Juno-cyber
  4

• What is the unit of acceleration?

  #47 opened 2 years ago by bbhxwl
  1

• question for the version

  #20 opened 2 years ago by nices0325
  3

• Accelerometer Word scale factor

  #36 opened 2 years ago by HT-SWRI
  2

• Want to use this library in code for our nano-satellite to detemine it's angular velocities on all 3-axis.

  #6 opened 2 years ago by rnbokade
  1

• esp32 2.0.4 Unlimited waiting for bugs

  #51 opened 2 years ago by bbhxwl
  19

• MPU-6050 Locks Up during Initialization

  #34 opened 3 years ago by mcpicoli
  1

• Library version should be bumped up.

  #50 opened 2 years ago by shaise
  3

• Which code should I use to set the current location to 0

  #46 opened 2 years ago by bbhxwl
  24

• ElectronicCats usage of teapot demo rotation system

  #45 opened 2 years ago by bumboo001
  6

• ElectronicCats

  #43 opened 2 years ago by Ganishk
  7

• Interrupt issue with ESP6682

  #17 opened 2 years ago by MACRODAT
  1

• When I move my mpu6050, sometimes the data will stay unchanged.

  #42 opened 2 years ago by bbhxwl
  17

• Will it be 0 by default according to the angle of my boot?

  #40 opened 2 years ago by bbhxwl
  36

• Is there a library to read mpu9250 angles?

  #41 opened 2 years ago by bbhxwl
  4

• Orientation

  #38 opened 2 years ago by doojinkang
  3

• How to get a Kalman filtering angle around the y-axis

  #39 opened 3 years ago by ffffire0316
  1

• Library claims ARM support but uses dtostrf

  #31 opened 3 years ago by renato-grottesi
  2

• 'class MPU6050' has no member named 'begin'

  #27 opened 3 years ago by LawsonDG
  2

• Supporting devices with WHOAMI 0x98

  #21 opened 3 years ago by holzachr
  3

• 'class MPU6050' has no member named 'begin'

  #29 opened 3 years ago by jihadjihadjihad
  2

• I think this is not an issue, but it can work in stm32f103ret6

  #26 opened 3 years ago by yulong88888
  1

• Compilation of demo MPU6050_DM6 for Arduino Nano 33 BLE fails [workaround included]

  #23 opened 4 years ago by robtasm
  2

• using MPU6050 no-interrupt gives erratic accel readings

  #14 opened 4 years ago by tonyvr4
  7

• how to get Temperature from MPU6050

  #15 opened 4 years ago by tonyvr4
  4

• Using DMP6 example code without Interrupt Pin

  #13 opened 4 years ago by tonyvr4
  2

• Is it possible to provide an example of reading from the FIFO without using DMP?

  #9 opened 4 years ago by aliafshar
  1

• Library does not interface with MPU6050 on Heltec Wifi V2 ESP32 Board

  #12 opened 4 years ago by tonyvr4
  4

• Arduino DUE error : '_BV' was not declared in this scope

  #8 opened 5 years ago by brian208579
  2

• Bits operation mistake

  #7 opened 5 years ago by mateusmenezes95
  4

• What is different from the original jrowberg/i2cdevlib

  #5 opened 5 years ago by intensite
  1