MN FRC CSA Support Request Website

This website is designed to help teams in FRC Northland get help from CSAs in a more efficient manner that can be easily tracked and managed. This is used to track issues both during and even outside of competition events.

New to FRC or Not Sure What a CSA is?

A Control System Advisor (CSA) is a volunteer at FIRST Robotics Competition events that helps teams with their robot's control system. They are the folks in the bright orange baseball caps that are really easy to spot. Common things CSAs assist with include the RoboRIO, the radio, the driver station, the programming language, electronics, and just about anything else related to running the robot. CSAs are there to help teams keep their robot running and playing on the field throughout the event so they can have the best possible experience. CSAs also help teams learn about their control system and how to work with and troubleshoot it. CSAs are a great resource for teams to use both at events and at home outside of events. The orange hats are your friend!

MN FRC CSA Support Request Website

Running With Docker

Here's how to get started hosting your own version of this application using the pre-built docker image based on this repository.

Ensure you have Docker installed on your machine. Install it if needed.
Run the following command to install and start the container.
- Note that there is a volume mount for the config directory. This is where the application stores its config and log files.
- You can explicitly set your own directory for the config file mount if you'd like, just replace mn-csa-website before the semicolon with the absolute path to your desired directory.
- If you are using Windows, I recommend leaving the mount the way it is to use Docker's volume mechanism to easily see the volume using Docker Desktop.
- The container will run on port 3000 by default with a name of "mn-csa-website", but feel free to change these as desired.

docker run -d --name mn-csa-website -p 3000:3000 -v mn-csa-website:/usr/src/app/config:rw ultimate360/mn-csa-website

You're not done yet! The container should start and then stop, this is expected because your config file is not filled in. You need to add your board IDs and Trello app key and token to the config file. You can get your Trello app key and user token from here. You can get your board trello ID by going to each of your Trello boards and copying the ID from the URL in the address bar, it looks something like ihy6gZJK. Once you have these, add them to the config.json file which can be found in your mapped volume or mount point used in the command.
Once you have your config file filled in, you can start the container again using the following command. The container should start and stay running this time. You will see output similar to the following if it starts successfully. Log entries will be written to a log file in the same directory as the config file so you can see what's happening behind the scenes and debug any issues that may arise.

4/4/2024 3:01:32 PM <INFO> (pre-checks.js)[checkIt] - Config file found, verifying it..
4/4/2024 3:01:32 PM <INFO> (pre-checks.js)[checkIt] - Config file looks good.
4/4/2024 3:01:32 PM <INFO> (pre-checks.js)[checkIt] - Pre-checks complete.
4/4/2024 3:01:32 PM <INFO> (logger.js)[trimLogFile] - Log file trim ran, 0 entries removed. Currently 794 entries, oldest from 4/4/2024. File size 81.68 KB
4/4/2024 3:01:33 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:33 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:33 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:34 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:34 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:34 PM <INFO> (trello.js)[verifyLabels] - Found 28 labels on board CxCc1Ofe
4/4/2024 3:01:34 PM <INFO> (host.js)[app.listen] - Server is running on http://localhost:3000

That's it! You can now access your instance of the website by going to http://localhost:3000 (or http://localhost:3000/fta for the FTA version) in your web browser. You can also access it from other devices on your network by replacing localhost with the IP address of the machine running the container.

Running Without Docker

If you'd like to run the application without using Docker, you can do so by following these steps.

Clone the repository to your machine.
Install Node.js if you haven't already. You can find the installer for your operating system on the Node.js website.
Open a terminal and navigate to the directory where you cloned the repository.
Run npm install to install the required dependencies.
Now fill in your config file located in the config directory. You can get your Trello app key and user token from here. You can get your board trello ID by going to each of your Trello boards and copying the ID from the URL in the address bar, it looks something like ihy6gZJK. Once you have these, add them to the config.json file.
Run npm start to start the application. You should see output similar to what is shown in the Docker section above.
That's it! You can now access your instance of the website by going to http://localhost:3000 (or http://localhost:3000/fta for the FTA version) in your web browser. You can also access it from other devices on your network by replacing localhost with the IP address of the machine running the application. Log entries will be written to a log file in the config directory so you can see what's happening behind the scenes and debug any issues that may arise.

Development

So you want to contribute to the project or tweak things yourself? Great! Here's how to get started.

First, go ahead and follow the same steps as above in the "Running Without Docker" section to get the application configured and running on your machine. Once you have it running, you can make changes to the code and restart the app to see them reflected in the application.

Important files and directories

config/config.json - This is where you will put your Trello app key and token, as well as the Trello IDs of the boards you want to use with the application. You can also customize, add, or remove labels from this file as you wish. Just be careful to make sure that colors you select are available as colors in the Trello REST API.
config/backend.log - This is the log file that the application creates and writes to as it does its thing. It contains organized messages from the application that can help with debugging and tracking what's happening behind the scenes. It's trimmed automatically to keep it from getting too large over time. Managed by backend/logger.js.
backend/host.js - This is the entry point of the application when running and it's where an express server lives. This express server serves the frontend and has endpoints to handle interactions with the frontend (like getting the data of the form when it's submitted).
backend/trello.js - This file contains all of the logic for interacting with the Trello REST API. It's where the app takes the submitted form data and creates a card on the Trello board. This is also where it checks and creates labels on the board if they don't exist at startup.
backend/pre-checks.js - This file contains the logic for checking for the existence of the config file and the validity of its contents. This is what will create a default config for you if you don't have one, and will remind you to fill in missing fields if they are not present. This runs once at every startup of the application.
public/ - This directory contains the frontend portion of the application. It's where the HTML, CSS, and client-side JavaScript live. You can make changes to the frontend here and see them reflected in the application when you restart it.
public/fta/ - This directory contains the FTA page of the application. It's where the HTML, CSS, and client-side JavaScript live for the FTA page. You can make changes to the frontend here and see them reflected in the application when you restart it. Note that this version is essentially a cut down version of the main version so that FTAs can enter just the essential information needed to get help and do so quickly.

Important Commands

For your convenience I added some NPM scripts to the package.json to make some dev tasks a little easier and more streamlined. Here's what's available:

npm start - This command starts the application. It will run the pre-checks and then start the express server. You can access the application by going to http://localhost:3000 in your web browser.
npm run docker-build - This command will build a docker image of the application. Remember to edit the image repository and name to your own, it's set to my my public one by default.
npm run docker-push - This command will push the docker image to the repository you specify. Use your own image and repository name you specified when building the image.
npm run docker-run - This command will locally run the docker image you just built. Use your own image and repository name you specified when building the image.
npm run nuke-labels - This command will remove all labels from all configured Trello boards. Be careful with this one, it's irreversible! This can be handy to clean up labels that are no longer needed or to start fresh on your boards so your labels match the config file. Heads up, it deletes ALL labels, even ones not created by the application.

Disclaimer

This project and the associated website is not affiliated with FIRST or any of its programs or partners. This project is independently created and represented by Logan Steffen, a Minnesota CSA of 5 years.

Good luck teams, we can't wait to see you at the events!

EthyMoney/mn-csa-website