F5OEO/rpitx

Issues

• Transmits, then stops

  #335 opened a year ago by radio-satellites
  6

• After runnig ./install.sh . RPI UI mode disable and RPI boot to terminal mode

  #345 opened 3 months ago by FTBSystem
  1

• long annoying tone before sendiq

  #342 opened 8 months ago by elapt1c
  1

• liquid_ssb.c

  #336 opened a year ago by Claudio-Sjo
  3

• FT8 makes tone only not FSK modulation

  #346 opened 2 months ago by barf
  1

• Artifacts in POCSAG signal on RPI 4

  #343 opened 5 months ago by cmessaouik
  0

• pift8 unusable on Pi 4

  #303 opened 2 years ago by hennichodernich
  1

• Pi4 POCSAG transmission failure

  #316 opened 2 years ago by kicomoco
  1

• Swedish letter Å Ä Ö

  #330 opened a year ago by supermusen
  7

• dvb/dvbsenco8.s:2: Error: junk at end of line, first unrecognized character is `@'

  #325 opened 2 years ago by epif4nio
  8

• POCSAG message sent 4 times and text is an alphanumeric string

  #326 opened 2 years ago by INDIGI-CO-UK
  1

• question about power output

  #333 opened a year ago by elapt1c
  3

• SSTV broken

  #340 opened a year ago by eneukirchner
  0

• Unable to compile on Book

  #339 opened a year ago by pi3rrot
  0

• Unable to replay 27Mhz toy RC car

  #338 opened a year ago by Hritik14
  7

• rpitx appends to wrong `config.txt` file, causing broken transmissions when running scripts

  #337 opened a year ago by Ben-Does-Arcade
  0

• Hi

  #332 opened a year ago by wolfyy59
  2

• PL tone on nfm transmission?

  #307 opened 2 years ago by RayRaytheGrape
  2

• custom image with sstv

  #334 opened a year ago by theguythatdidsomething
  0

• Another question about pocsag

  #331 opened a year ago by EB1ESK
  0

• Amplitude modulation

  #328 opened a year ago by Michael-AUG
  4

• Continuous wave during NFM .wav file tx

  #327 opened 2 years ago by martinpetrovaj
  4

• Will you continue work on this project

  #324 opened 2 years ago by sysadminpower2019
  1

• Transmission not working on Raspberry Pi 3B+

  #318 opened 2 years ago by marines1
  7

• Compile fails at ./install.sh: missing semicolons at code

  #320 opened 2 years ago by iordic
  1

• librpitx

  #321 opened 2 years ago by shortgame11
  0

• Raspbery Pi Bookworm lbcm_host and semicolons missing

  #323 opened 2 years ago by ChazTuna
  2

• Where is SendOOK.sh?

  #310 opened 2 years ago by petitxef
  2

• More dead projects?

  #317 opened 2 years ago by sysadminpower2019
  2

• Alternative SBC while Raspberry Pi's are hard to obtain?

  #291 opened 2 years ago by Trevo525
  2

• Documentation?

  #292 opened 3 years ago by olalonde
  1

• Do we support the Pico?

  #308 opened 2 years ago by fumin
  3

• Car hacking

  #309 opened 2 years ago by Omichauhan
  1

• On/off codes? (Feature or doc request)

  #319 opened 2 years ago by hepcat72
  0

• Wont install on latest Debian Bookworm

  #314 opened 2 years ago by roda37
  1

• O/S Question

  #313 opened 2 years ago by dave21w
  1

• Pager message sent 4 times on some frequencies

  #312 opened 2 years ago by mrDevGit
  3

• Installation fatal error: librpitx/librpitx.h

  #311 opened 2 years ago by petitxef
  1

• SSTV Noise

  #301 opened 2 years ago by nau4k
  0

• Any way to change rds data?

  #304 opened 2 years ago by RayRaytheGrape
  1

• DMR transmitter

  #296 opened 3 years ago by nullsignzero
  1

• Feature request - Morse code / fox hunting

  #305 opened 2 years ago by MrMinecraft97
  1

• Number not recognized when sending pocsag

  #302 opened 2 years ago by Waiker
  1

• SendIQ or RTL-SDR command not working properly

  #293 opened 3 years ago by Mifaxav
  5

• How To Send Data and Image using rpitx?

  #294 opened 2 years ago by nau4k
  6

• I Have a Question

  #298 opened 2 years ago by nau4k
  1

• GPIO 17?

  #300 opened 3 years ago by Mifaxav
  0

• Send IQ issue with external 433 MHz ask transmitter

  #299 opened 3 years ago by Mifaxav
  4

• Raspberry v1.2 B+ SSB and NFM problem

  #297 opened 3 years ago by ZetkaTV
  1

• Install for Alpine Linux

  #295 opened 3 years ago by AlexCzar
  5