Pinned Repositories
fluidd
Fluidd, the klipper UI.
klipper
Klipper is a 3d-printer firmware
klipper_hybrid_corexy
Single Toolhead Hybrid CoreXY Kinematic
klipper_linear_movement_analysis
RatOS
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer.
RatOS-configuration
The RatOS modular klipper configuration
RatOS-configurator
The RatOS Configurator
rome
Multi extruder to direct extruder setup
vcore-idex
v-core idex config
winfi
HelgeKeck's Repositories
HelgeKeck/winfi
HelgeKeck/RatOS
The preconfigured Raspberry Pi image that makes it easy to run Klipper + Moonraker + Mainsail on your printer.
HelgeKeck/klipper_linear_movement_analysis
HelgeKeck/rome
Multi extruder to direct extruder setup
HelgeKeck/RatOS-configuration
The RatOS modular klipper configuration
HelgeKeck/klipper_hybrid_corexy
Single Toolhead Hybrid CoreXY Kinematic
HelgeKeck/vcore-idex
v-core idex config
HelgeKeck/fluidd
Fluidd, the klipper UI.
HelgeKeck/klipper
Klipper is a 3d-printer firmware
HelgeKeck/RatOS-configurator
The RatOS Configurator
HelgeKeck/vcore-slider
A simple camera slider for the Rat Rig V-Core 3d printer
HelgeKeck/STM32duino-bootloader
Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE
HelgeKeck/uberlapse
Create 3D print timelapses with Klipper.
HelgeKeck/Arduino_STM32
Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards
HelgeKeck/dapboot
DFU Bootloader for STM32 chips
HelgeKeck/openMVG
open Multiple View Geometry library. Basis for 3D computer vision and Structure from Motion.
HelgeKeck/FullControl-GCode-Designer
Software for designing GCODE for 3D printing
HelgeKeck/ndisapi.net
C# Interface for Windows Packet Filter
HelgeKeck/STMViewer
Real-time STM32 variable & trace viewer
HelgeKeck/wemos_motor_shield
Alternative firmware for Wemos Motor Shield