Jpe230/SonicPad-Debian

Issues

• Resonance test hangs Klipper

  #60 opened 5 months ago by pechex
  3

• creality nebula camera

  #47 opened 10 months ago by bhast2
  45

• Klipper doesn't start

  #62 opened 4 months ago by JozephSchmoe
  3

• Multiboot

  #52 opened 9 months ago by artyfarty
  6

• detailed installation guide

  #42 opened a year ago by Nocentinia
  9

• Wrong Root Password

  #53 opened 8 months ago by Inf1n1ty0
  2

• Power Loss Recovery Feature

  #55 opened 8 months ago by Inf1n1ty0
  1

• webcam low ips and no wifi

  #58 opened 7 months ago by barthemb
  1

• cant get sonic pads adxl resonance tester connected

  #64 opened 2 months ago by Outoftheshadows3D
  3

• Octoprint

  #63 opened 3 months ago by theoriginalduck
  0

• CSP Accelerometer: mcu 'rpi': Unable to connect

  #61 opened 5 months ago by Lemmingski
  1

• Switch between 2 printers

  #46 opened 7 months ago by Matze9876
  1

• sudo brightness not permanent

  #30 opened 7 months ago by JurajMik
  1

• Creality Serial to USB adapter.

  #22 opened 7 months ago by SaltyNewfie
  17

• new R818 Repository issue

  #56 opened 8 months ago by HoudiniCerini
  4

• Unable to use CANbus

  #50 opened 10 months ago by filamonkey
  3

• Error during pack image

  #57 opened 8 months ago by Skydsler
  0

• Static IP issue

  #54 opened 8 months ago by ale-ben
  0

• Probably just me

  #51 opened 9 months ago by whtz
  0

• None make the Klipper 'make' tools work...

  #24 opened 10 months ago by imacmill
  9

• USB stick and webcam not working

  #31 opened 10 months ago by AK3DLv
  3

• im wondering how to get the adxl345 working im getting Unknown pin chip name 'rpi' error in printer.cfg

  #40 opened 10 months ago by Glod76
  3

• Idle Timeout

  #29 opened 10 months ago by erwann17
  3

• Klipperscreen update

  #13 opened 10 months ago by beroliv
  2

• IP conflict

  #49 opened 10 months ago by Brakisshuro
  0

• Host shutdown and reboot from the fluidd menu

  #45 opened 10 months ago by sahuddy
  12

• factory reset

  #41 opened 10 months ago by m4sis
  2

• installing from mac

  #36 opened 10 months ago by fridaystreet
  10

• USB connection, must have done something wrong

  #48 opened 10 months ago by Brakisshuro
  0

• cannot conect to Moonraker

  #43 opened a year ago by adalenickels
  0

• MCU protocol error

  #44 opened a year ago by Scipolah
  1

• Corrupted image?

  #38 opened a year ago by RickJames420911
  1

• Resonance Calibration

  #37 opened a year ago by Neckr0ik
  1

• Input Shaping with Creality Accelerometer

  #35 opened a year ago by tghelmbrecht
  2

• Kiauh telegram bot install failure

  #15 opened a year ago by gjm19761
  2

• Same Wifi MacAdresses on 2 Devices

  #33 opened a year ago by cyclemat
  10

• Printer not found

  #34 opened a year ago by Scipolah
  10

• how to flip the screen on the sonic pad and how use the spi port for adxl

  #32 opened a year ago by cyclemat
  1

• Update to debian 12

  #27 opened a year ago by erwann17
  0

• using adxl gives me problems

  #23 opened a year ago by Egalistel
  2

• Add ip_tables to kernel

  #25 opened a year ago by PhilippF1992
  2

• mobilraker

  #21 opened a year ago by m4sis
  3

• time setting

  #20 opened a year ago by m4sis
  2

• Need Help please !

  #19 opened a year ago by Toddi3D
  1

• How do I rotate the display?

  #18 opened a year ago by BakeJake
  4

• unable to open a gcode file

  #17 opened a year ago by Tance85
  2

• Changing Boot Splash Image, M300 Support?

  #16 opened a year ago by mdewyer
  2

• How to Configure ADXL?

  #12 opened a year ago by beroliv
  14

• How to configure static ip?

  #14 opened a year ago by A-Saav
  2

• Storage issue

  #11 opened a year ago by iLbsLi
  5