Laxilef/OTGateway

Issues

• Cannot flash Lolin D1 mini v4.0.0

  #78 opened a month ago by gunarser
  7

• BOM.xlsx, не хватает всех Manufacturer Part

  #69 opened 3 months ago by RasimKalimullin
  4

• OpenTherm Settings inputs rollback to default after refresh

  #76 opened 3 months ago by Quiss
  4

• [noob question] can't connect to wifi

  #61 opened 3 months ago by papinist
  32

• Just a question about ESP32 hardware

  #67 opened 3 months ago by iz8mbw
  2

• Cannot compile any 8266 configuration. ESP32 ok.

  #68 opened 3 months ago by dee-mos
  3

• Static IP not applied after restart

  #70 opened 3 months ago by Saur0o0n
  1

• Viessmann Vitodens 100-W DHW temperature is displayed as Heating in opentherm.

  #58 opened 3 months ago by nedievas
  64

• Счетчик импульсов

  #63 opened 4 months ago by andrey150960
  4

• Matter support

  #65 opened 4 months ago by basroovers
  3

• Matter support

  #64 opened 4 months ago by vic-basroovers
  0

• how i install this integration in HomeAssistant

  #60 opened 5 months ago by PrimitixLuke
  3

• на прошивках выше filesystem_d1_mini32_1.4.0-rc.14 не видит котла

  #62 opened 5 months ago by andrey150960
  0

• Build is broken: lib/WiFiManagerParameters/WiFiManagerParameters.h:33:15: error: 'const char* CheckboxParameter::getValue() const' marked 'override', but does not override

  #59 opened 5 months ago by jandebleser
  2

• Monitoring mode only ?

  #28 opened 8 months ago by 0BuRner
  9

• Failed to upgrade OTA

  #47 opened 6 months ago by blitzu
  7

• Losing connection with boiler

  #53 opened 6 months ago by shaggee
  12

• Request: exhaust temperature

  #42 opened 6 months ago by Pajuris
  14

• Request: Multiple PID based Climates for multi-room purposes?

  #54 opened 6 months ago by GravitySandwichh
  8

• Baxi eco 4s + WeMos D1 sheld. [OT][WARN] Invalid response after setBoilerStatus: TIMEOUT

  #57 opened 7 months ago by MrDogYar
  12

• Baxi Ampera не включается

  #56 opened 7 months ago by c0dr1ver
  10

• Request: Ethernet connection support

  #55 opened 7 months ago by pksoft585
  1

• Outdoor and Indoor temp MQTT does not work properly

  #52 opened 7 months ago by shaggee
  2

• delay() в библиотеках DallasTemperature и OpenTherm

  #43 opened 7 months ago by BCometto
  4

• FERROLI ATLAS D 30 UNIT

  #44 opened 7 months ago by ea1iof
  3

• Gas Consumption over OpenTherme

  #25 opened 9 months ago by martinarva
  10

• Invalid values for number.opentherm_pid_p and number.opentherm_pid_d

  #35 opened 7 months ago by Pajuris
  13

• Permanent connection to the BLE sensor, fast discharge

  #40 opened 7 months ago by Laxilef
  3

• Opentherm gateway Homeassistant parametars

  #34 opened 7 months ago by DeadlySin2
  3

• Start/stop heating with HA automation instead of temp control

  #29 opened 8 months ago by martinarva
  6

• Можно ли использовать как замену термостату?

  #33 opened 8 months ago by DeadlySin2
  10

• DHW temperature high when the DHW is not running

  #46 opened 8 months ago by vespadrift
  1

• noob request

  #45 opened 8 months ago by vespadrift
  1

• Can't get the correct values ​​for the Heating temp and setpoint

  #41 opened 8 months ago by vespadrift
  2

• sensor.opentherm_dhw_flow_rate unavailable

  #39 opened 8 months ago by Pajuris
  4

• Intergrating TRV's

  #31 opened 8 months ago by nekocentral
  12

• Wifi Watchdog

  #30 opened 8 months ago by blitzu
  20

• delfis ctfs 24" nova florida no heating control

  #38 opened 8 months ago by andrey150960
  9

• 'L/min' is not a valid unit for the device class ('volume')

  #37 opened 8 months ago by Pajuris
  0

• navien NCB700 конденсатный

  #36 opened 8 months ago by PavelTelnov
  1

• Hot Water start and stop

  #27 opened 8 months ago by martinarva
  7

• CPL file for PCB order

  #32 opened 8 months ago by tkolik
  1

• In some conditions OTGateway reports 0 for setpoint and outdoor temperature

  #18 opened 9 months ago by SimplyKot
  5

• Предложения по работе с PID

  #23 opened 9 months ago by bigbrother72
  8

• Heating max temp is not set

  #26 opened 9 months ago by martinarva
  3

• Adapter compatibility ESP32 S3 + DIYLESS

  #15 opened 9 months ago by critictidier
  4

• Domusa Bioclass HM 16

  #21 opened 9 months ago by Laxilef
  9

• Master branch doesn't compile for ESP8266

  #24 opened 9 months ago by aurelmarius
  2

• Opentherm Gateway Heating

  #20 opened 10 months ago by strk90
  9

• Report temperature from forecast doesn't work

  #16 opened 10 months ago by SimplyKot
  6