/Light_Color_and_Intensity_Datalogger

Measures temperature, pressure, humidity, intensity and color of light and saves it to an SD card

Primary LanguageC++Apache License 2.0Apache-2.0

Data Logger: Temperature, Pressure, Humidity, Light Intensity and Color

Summary:

This is an open-source data logger that can record air temperature, air pressure, relative humidity, visible light instensity, near-infrared light intensity, and visible light color (RGB). This data logger can record at up to 1 Hz onto a FAT32 formatted SD card. At 1Hz and with a full battery pack (6 AAs) the data logger should run for 200+ days on a single pack (depending on the SD card), with lower sampling frequencies increasing the duration to a maximum of >800 days (depending on the SD card). The light sensors employ an autogain feature with the intensity sensor having a 600,000,000:1 dynamic range, and a minimum sensitivity at about 1.0 nW/cm2.

Windows users: Use this program to format SD cards >32 GB http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm

For information on ordering, assembly, and programming, please see the instruction manual.

Development of this data logger was funded by NIH P30-EY003176-32