MWATelescope/mwalib

Issues

• Implement signal chain correction metadata from new metafits HDU

  #76 opened 4 months ago by gsleap
  1

• arm64 error[E0308]: mismatched types

  #67 opened 10 months ago by d3v-null
  11

• Change deripple read from metafits to use DERIPPLE and not DR_FLAG as it is becoming deprecated

  #73 opened 5 months ago by gsleap
  0

• read calibration solutions from metafits

  #74 opened 5 months ago by d3v-null
  0

• Expose calibration fit data from metafits file

  #31 opened 5 months ago by gsleap
  1

• Release github action- need to replace depreacted release action

  #72 opened 7 months ago by gsleap
  1

• extremely minor issue in example

  #71 opened 8 months ago by d3v-null
  0

• SHAO and EDA2 receiver type support for rf_input struct

  #69 opened 9 months ago by d3v-null
  0

• Remove support for Python 3.7 (it is EOL). Add support for Python 3.12

  #66 opened a year ago by gsleap
  1

• `pip install mwalib` does not work on Python 3.11

  #63 opened a year ago by d3v-null
  1

• Add cable flavour and has_whitening_filter to rfinput struct

  #64 opened a year ago by gsleap
  2

• Ensure voltage buffer dump is supported

  #59 opened a year ago by gsleap
  0

• Expose deripple setting from metafits

  #61 opened a year ago by gsleap
  0

• Ensure oversampled data is supported

  #60 opened a year ago by gsleap
  0

• Defining vcsorder for rfinputs >= 256

  #58 opened 2 years ago by robotopia
  1

• Handle missing metafits cards

  #55 opened 2 years ago by gsleap
  0

• can't read gpuboxes when MILLITIM not set

  #52 opened 2 years ago by d3v-null
  0

• can't read obs with inconsistent timesteps

  #54 opened 2 years ago by d3v-null
  0

• Improved FFI error handling

  #51 opened 2 years ago by gsleap
  0

• Migrate to hifitime for time keeping

  #50 opened 2 years ago by gsleap
  0

• Digital gains read from metafits tiledata table should be divided by 64 and exposed as an f64

  #48 opened 3 years ago by gsleap
  1

• Error when passing only a non 000 batch as the only file to a CorrelatorContext

  #45 opened 3 years ago by gsleap
  0

• Re-open GPUBox number issue for legacy VCS

  #44 opened 3 years ago by robotopia
  1

• GPUBox numbers assigned 'incorrectly' for legacy VCS metafits

  #41 opened 3 years ago by robotopia
  1

• GRIDNUM should be optional

  #40 opened 3 years ago by cjordan
  0

• Add new metafits key / value RAWSCALE

  #42 opened 3 years ago by gsleap
  0

• MWA constants to be exposed in C API

  #38 opened 3 years ago by robotopia
  0

• Null termination not happening in C API

  #39 opened 3 years ago by robotopia
  0

• Provide contigous spw structures within provided, common and common_good for coarse channels

  #43 opened 3 years ago by gsleap
  0

• Update wiki "Installation via Github Release"

  #37 opened 3 years ago by vevilo
  1

• num_metafits_fine_chan_freqs_hz is not correct

  #36 opened 3 years ago by gsleap
  1

• metafits_fine_chan_freqs in FFI should be renamed to metafits_fine_chan_freqs_hz

  #35 opened 3 years ago by gsleap
  1

• Provide a generate_expected_volt_filenames method on metafits context

  #32 opened 3 years ago by gsleap
  1

• Expose digital_gains, dipole_gains, dipole_deplays in rf_input to FFI interface

  #33 opened 3 years ago by gsleap
  1

• Expose pointing table from metafits

  #30 opened 3 years ago by gsleap
  3

• Provide coarse channel metadata in the metafits context

  #18 opened 3 years ago by gsleap
  1

• Visibility interface does not allow access to all timesteps, and coarse channel indices are ambiguous

  #22 opened 3 years ago by d3v-null
  2

• Add electrical length to antenna

  #27 opened 4 years ago by gsleap
  1

• Make mode an enum in metafits context

  #28 opened 4 years ago by gsleap
  1

• Implement external CI runner

  #29 opened 4 years ago by gsleap
  0

• Change visibility pol to use enums

  #26 opened 4 years ago by gsleap
  3

• Allow access to uncommon timesteps and coarse channels in voltages and visibilities

  #19 opened 4 years ago by gsleap
  1

• Antennas and rfinputs vectors not sorted consistently in VoltageContext

  #25 opened 4 years ago by gsleap
  1

• Expose version number to FFI

  #23 opened 4 years ago by gsleap
  1

• CoarseChannel.corr_chan_number not correct when only accessing subset of channels

  #24 opened 4 years ago by gsleap
  1

• Benchmarking of read methods

  #21 opened 4 years ago by d3v-null
  0

• When missing metafits keyword, provide better error message to users

  #17 opened 4 years ago by gsleap
  0

• Add MacOS support

  #14 opened 4 years ago by gsleap
  1

• Ensure legacy visibilities end up in cotter/CASA handedness

  #16 opened 4 years ago by gsleap
  1

• Include unmodified cotter results in coversion unit tests

  #15 opened 4 years ago by gsleap
  1