Issues
- 0
I am having an issue downloading this lib in arduino ide when i download from zip it gives me error 13 (lib not valid) and it is not working when i am copying the http link either need help
#130 opened by Instru12 - 4
Trying to use Linx with STM32F4
#129 opened by L1ikhith - 5
SPI communication with STM32 using linx
#128 opened by L1ikhith - 0
Raspberry Pi 5 UART mapping
#127 opened by albsbc - 1
Add Wifire Support
#85 opened by samkristoff - 0
- 0
PmodTC1 Read Data Type Mismatch
#106 opened by digilentSoftware - 0
No need to wait after Wire.requestFrom().
#105 opened by Koepel - 0
Adding native chip select support for Raspberry Pi
#104 opened by amaury10 - 0
Adding NodeMCU example
#103 opened by wbadry - 1
Read Pulse Width Simuluse Pulse Default Wrong
#100 opened by Nathan--B - 0
LINX - Thermistor Read Example broken
#101 opened by melbmaker - 0
Update examples to support serial/tcp/local
#98 opened by samkristoff - 0
- 0
Add WS2812 Firmware Lib To Installer
#87 opened by samkristoff - 1
- 0
Firmware Wizard output message is misleading
#95 opened by samkristoff - 0
myRIO Ignores I2C EOF Config
#94 opened by samkristoff - 1
Update chipKIT network libraries to DEIP
#62 opened by samkristoff - 2
- 1
UART Read Available Bytes is broken
#84 opened by scsukas8 - 1
LINX Init Platform Update
#89 opened by samkristoff - 1
- 1
LINX Simplify LINX Init
#90 opened by samkristoff - 0
Add Support For TC-MK2-31855
#92 opened by samkristoff - 1
LINX Init - LINX Ref should be LINX Resource
#91 opened by samkristoff - 0
Add Support For LTC2631
#86 opened by samkristoff - 0
Add Due Support
#69 opened by samkristoff - 1
- 1
Feature request: Control (enable/disable) internal pullup resistor on Digital pin in Arduino
#63 opened by Ryton - 1
Thermistor Read AI Ref Necessary Input
#68 opened by samkristoff - 1
- 1
- 1
- 1
- 1
Add more I2C documentation to context help.
#80 opened by samkristoff - 1
I2C Write channel defaults to 1, should be 0.
#81 opened by samkristoff - 1
AI Ref Default value is 5000 should be 5
#82 opened by samkristoff - 0
Feature Request - Firmware Watchdog
#83 opened by samkristoff - 0
Feature Request: Support Arduino Pro Mini
#75 opened by samkristoff - 0
Sensor: Add Support for MAX31855
#73 opened by samkristoff - 0
Teensy 3.1 - Upgrade AI to 16 bits
#72 opened by samkristoff - 0
Add TC77 Support
#71 opened by samkristoff - 0
- 0
Make Help VIs FP Invisible
#66 opened by samkristoff - 1
- 1
Rebuild All Firmware
#60 opened by samkristoff - 2
- 1
- 1
Set Default Path In Generate Firmware Wizard
#58 opened by samkristoff