Problems about showing .ply in LiveScanPlayer.exe
ERICXUCHI opened this issue · 9 comments
Hi, team. I have saved the .ply files, but when I started the player and selected the files, the current number is changing from 0 to 50 frame but nothing shows on the screen, should there be a 3D player showed? Or how I can do to solve this problem?
2 Windows 10 + 2 Azure Kinects
the screen is like below:
You just need to click on the "Show live" button
Thanks for your reply! Yeah, I tried your suggestion but nothing happened. The FPS is always 0.
What's more, when I tried to 'show live' in the server.exe, the FPS is about 15 on average (with T500 GPU) and nothing shows on the screen.
And when I tried to save .ply, all .ply is 1kb, which I thought I did not save them successfully.
Do you ever encounter such problems? Or how I could do to solve it😂
Hm it could be that you actually didn't record anything. When you can't see anything in the Live Preview on the server, this also means no data is being recorded. How large is your .bin file?
The FPS being low is normal, that's due to the limited bandwith.
I have used two Azure Kinects so there is perhaps no .bin file.
Are there any alternative solutions? 😣
There should be a .bin file in the LiveScan3D/bin/ folder called recording_XXX.bin after you've recorded a capture. Do you see anything there?
Yeah, I saw it under /bin folder. But the .bin file is also about 1-5 kb, there may be something wrong during recording.
What's more, I cannot see anything when I click 'show live' in the server.exe, even though the FPS ~30.
However, if I did not generate the release version and just click 'run' in the visual studio 2019, the 'show live' runs correctly and can show the images. Do you ever encounter this problem?
I see you started a new issue. Could you close this one?
Yeah, no problem. I found that in this repo "https://github.com/BuildingVolumes/LiveScan3D" it works. Thanks a lot!