Miceuz/i2c-moisture-sensor

Issues

• Multiple sensors measurements

  #43 opened 2 months ago by smjacques
  0

• Reading capacitance fails on esp32 after sleeping

  #42 opened a year ago by ethanhjennings
  2

• I2C all of a sudden stops working

  #41 opened 2 years ago by sebastianneubauer
  7

• sensor lost address and reading values are not corect ocasionaly - ESP2866 tasmota

  #22 opened 2 years ago by roblad
  0

• Sleep mode: Rak module require datas

  #36 opened 2 years ago by vrenaville
  2

• ESP32/ MQTT/ LoRa version?

  #37 opened 3 years ago by samuk
  2

• Include data format in register address

  #40 opened 2 years ago by kriskeillor
  2

• No response to I2Cdriver command line

  #38 opened 3 years ago by kriskeillor
  5

• Mosfet instead of Q2 and Q3 bipolar ?

  #39 opened 3 years ago by pit34
  2

• Temperature Funky above 25°

  #35 opened 3 years ago by vrenaville
  3

• Capacitance 65535

  #34 opened 4 years ago by greg10810
  0

• Shorter insert depth

  #33 opened 4 years ago by chris-tanner-brightpearl
  0

• Qwiic connectors

  #30 opened 5 years ago by la7dja
  7

• Cannot change the address with RasPi/Python script.

  #32 opened 5 years ago by DIY-Blub
  2

• Can it be used outdoor ?

  #1 opened 9 years ago by txaj
  3

• Question about the excitation pin

  #29 opened 5 years ago by Eriobis
  2

• README.md: Broken link

  #25 opened 6 years ago by gmacario
  1

• Instructions for upgrading from 2.4 to 2.7 firmware?

  #28 opened 6 years ago by akutruff
  1

• strange reading on the light sensor & bugs in example code??

  #2 opened 6 years ago by krikk
  9

• Gerbers for 2.7.5

  #19 opened 6 years ago by bilbolodz
  2

• Capacitive measurement

  #27 opened 6 years ago by rubengr
  2

• HW question: Why is there space between capacity and electronics

  #24 opened 6 years ago by 2ni
  1

• Colour code of cable

  #23 opened 7 years ago by Rudertier
  2

• Suddenly weird reading?

  #8 opened 8 years ago by solars
  10

• Measuring capacitance: Frequency counting?

  #20 opened 7 years ago by DFyson
  2

• Capacitance values

  #21 opened 7 years ago by DFyson
  1

• Arduino Pull Up Resistors

  #3 opened 8 years ago by SackLunch
  9

• Soil Moisture Capacitance depends on power supply voltage

  #14 opened 7 years ago by bilbolodz
  9

• Trouble getting reading from Chirp! with Raspberry PI

  #17 opened 7 years ago by dpassarella
  1

• Invalid data after some time

  #16 opened 7 years ago by lobeck
  2

• improve sensitvity

  #15 opened 7 years ago by mindforger
  1

• Reading of getCapacitance() gets "historical data"

  #13 opened 7 years ago by bilbolodz
  1

• Sensor outputs only 65535 as the reading

  #11 opened 8 years ago by varunhr
  2

• low power usage

  #12 opened 8 years ago by parallelpilgrim
  1

• Attiny getCapacitance wrong?

  #7 opened 8 years ago by breemts
  2

• Trigger external reset

  #10 opened 8 years ago by pilotak
  2

• Can use Attiny44A to replace Attiny441?

  #9 opened 8 years ago by tornadocean
  0

• Getting this to work with Particle Photon Microcontrollers

  #6 opened 8 years ago by marzipanic
  2

• compile error

  #4 opened 9 years ago by pilotak
  3