NetAppDocs/ontap-systems-switches

Issues

• What is the length of the ecdsa crypto key 521 or 256?

  #207 opened 2 months ago by amadorloureiro
  0

• Request warning/clarification on step 2: configure ports

  #206 opened 2 months ago by JMnetapp
  1

• Is the "show ip ssh" available in a Cisco 9336C-FX2 NX-OS 9.3(*)

  #204 opened 2 months ago by amadorloureiro
  1

• queries for current steps of Install RCF

  #196 opened 3 months ago by zhuolin-shen
  2

• NVIDIA ISL port speed change (40/100Gb to 100GbE only)

  #197 opened 4 months ago by yasuharu-k
  2

• Incomplete procedure provided

  #198 opened 4 months ago by JMnetapp
  1

• No interface revert between changing cl2 and cl1

  #190 opened 4 months ago by Storwars
  2

• The Step 2 "Configure and verify the setup" section is misleading and incomplete

  #189 opened 4 months ago by darrcito
  2

• add in step to check serial number.

  #191 opened 4 months ago by randallk72
  2

• need to add step to confirm serial number before replacing switch

  #192 opened 4 months ago by randallk72
  2

• Nexus 3132Q-V RCF install has wrong kb link

  #193 opened 4 months ago by j-schwaiger
  2

• Storage Switch RCF install/upgrade

  #187 opened 5 months ago by JMnetapp
  1

• dead link

  #186 opened 5 months ago by netappmf
  1

• Request to add steps to for EFOS 3.4.4.6 to 3.7.x.x and higher versions to avoid ISL issue/outage

  #159 opened 5 months ago by ArronKlem
  5

• Install the Reference Configuration File (RCF) NX3132

  #182 opened 6 months ago by JMnetapp
  2

• Install the Reference Configuration File (RCF) BES-53248

  #180 opened 6 months ago by JMnetapp
  2

• Add 9.10.1P15+ and 9.11.1P12+ to BES-53248 cluster switch log collection requirements

  #179 opened 6 months ago by amadorloureiro
  2

• BES-53248 RCF upgrade process does not account for licensed ports

  #175 opened 6 months ago by ArronKlem
  2

• SSE Feedback - EFOS Upgrade with 3.4.xx or 3.4.4.6

  #124 opened 6 months ago by TimMcGue
  3

• EPLD Upgrade necessary?

  #184 opened 6 months ago by netappmf
  2

• To prevent out of quruom issues extra warnings need to be displayed

  #178 opened 6 months ago by emile-bodin
  2

• Switch reboot at the end of RCF change rpocedure

  #176 opened 6 months ago by netappmf
  2

• SSE Feedback: Switchless Cluster Detection

  #131 opened 7 months ago by tullynet
  4

• Need to update, EFOS are up to 3.11.

  #170 opened 7 months ago by aneises1
  4

• Applying RCF 1.9 or 1.10 would require manual file changes

  #144 opened a year ago by amadorloureiro
  3

• lif revert has to be done from the local nodes

  #173 opened 7 months ago by netappmf
  2

• warning for usage of using 10G/25G combinations

  #163 opened 7 months ago by netappmf
  2

• steps 6-10 should be change

  #161 opened 7 months ago by netappmf
  2

• link broken: What’s next? Enable the log collection feature.

  #168 opened 7 months ago by loganbaez
  2

• broken link

  #169 opened 7 months ago by loganbaez
  2

• Enable log collection

  #166 opened 7 months ago by TimMcGue
  4

• Customers want a Broadcom BES-53248 to Cisco Nexus 9336C-FX2 migration procedure

  #167 opened 8 months ago by amadorloureiro
  2

• Potential error at step 12

  #157 opened 8 months ago by twodotoh
  2

• Add note, to confirm that "shut down the ports" won't break the cluster network connectivity

  #156 opened 8 months ago by amadorloureiro
  2

• "crypto key generate" requires SSH disabled first

  #153 opened 9 months ago by amadorloureiro
  2

• 9336C-FX2 storage switch RCF cabling worksheet is incorrect

  #149 opened 10 months ago by andris-ntap
  2

• 9336C-FX2 cabling worksheet erroneously calls out 4x100GbE ports

  #150 opened 10 months ago by andris-ntap
  3

• Need to add 4x25GbE support to 3232C cabling worksheet topic

  #151 opened 10 months ago by andris-ntap
  2

• Information not current

  #146 opened 10 months ago by alexandregobbi
  2

• Add a mandatory "write erase" warning, specially when upgrading from 1.8 or older to 1.10 or newer

  #141 opened a year ago by amadorloureiro
  2

• nv config apply

  #136 opened a year ago by simonhazell
  2

• scp or wget

  #137 opened a year ago by simonhazell
  2

• Should we explicitly state that this is JUST for storage switches upgrades?

  #140 opened a year ago by amadorloureiro
  1

• Wrong commands listed for BES-53248 - not EFOS CLI

  #135 opened a year ago by andris-ntap
  2

• Shouldn't this page have a step on disabling cluster LIF auto-revert?

  #133 opened a year ago by farkeytron
  1

• requirement for NetApp-sources switches

  #126 opened a year ago by nlsntap
  5

• placed in wrong section

  #128 opened a year ago by nlsntap
  2

• EPLD changes

  #129 opened a year ago by JMnetapp
  2

• Remove the temporary port-channel

  #123 opened a year ago by AymenFeddaoui
  4

• On step 6, could we perhaps link this KB

  #122 opened a year ago by ericd-netapp
  2