Nickduino/Pi-Somfy

Issues

• Trying to program shutter - nothing happens..

  #167 opened 5 months ago by arielgr
  3

• Not able to start PIGPIO (again, but on RPi5)

  #165 opened 8 months ago by geohei
  2

• TX pin is initialized high after startup

  #154 opened 2 years ago by Scrath1
  1

• Depreciation and upper-/lowercase issue w/ RTS addresses in [ShutterRollingCodes] section

  #166 opened 8 months ago by geohei
  0

• Alexa does not discover device

  #114 opened 4 years ago by schweppy
  6

• Shutter Is Moving Property?

  #162 opened a year ago by FranzToepfer
  0

• Somfy Pi

  #142 opened a year ago by 3DGenius79
  8

• Test on RPI4

  #161 opened a year ago by Zachary57-fr
  6

• e07-m1101d compatibility

  #155 opened a year ago by Sundancescore
  3

• Will this work with Banana pi or Orange pi?

  #150 opened a year ago by ybelakov
  0

• Raspberry Pi Pico W Compatibility

  #157 opened a year ago by vapouryh
  1

• Multiple channels activated on press

  #137 opened 3 years ago by pedroandrade1977
  10

• Open/Close Shutter Duration - How initialized?

  #158 opened 2 years ago by FranzToepfer
  1

• Latest Raspberry Pi OS

  #102 opened 4 years ago by MichaelB2018
  25

• Should that work in 433.92 MHz?

  #153 opened 2 years ago by slashback100
  2

• Can´t pair my Shutters

  #151 opened 2 years ago by NoI3ody
  10

• 32 to 64 bit issue

  #152 opened 2 years ago by alastaid
  11

• PIGPIO timing off by a factor of 2

  #136 opened 3 years ago by harebrainedkiwi
  4

• Pi-Somfy with Apache2 WSGI integration

  #149 opened 2 years ago by RaspiGuru
  0

• DIfference between old and new blinds

  #148 opened 2 years ago by PederHatlen
  1

• Feedback

  #146 opened 2 years ago by RicharddeCrep
  0

• One Specific Shade Not Working

  #125 opened 3 years ago by Ben10lightningx
  5

• Flawed crystal or poor soldering or should this have worked?

  #129 opened 2 years ago by sfla
  19

• Infinite loading time

  #144 opened 2 years ago by Assassinee
  2

• ShutterName

  #143 opened 2 years ago by CycleMark
  1

• CC1101

  #103 opened 4 years ago by HerbOtto
  8

• Cover only moves by a small amount

  #113 opened 4 years ago by Plawasan
  2

• Moved to different Pi breaks?

  #140 opened 3 years ago by danjhd
  1

• Can this be used concurrently with a normal somfy rts remote?

  #138 opened 3 years ago by Scrath1
  2

• Program remote for Somfy Meteolis 6 (RTS)

  #127 opened 3 years ago by bobf41
  16

• FS1000A transmitter versions

  #135 opened 3 years ago by wewa00
  1

• Newer `requirements.txt` versions incompatible with pi-zero

  #134 opened 3 years ago by janstenpickle
  6

• How to emulate the Setup procedure

  #130 opened 3 years ago by MarkGodwin
  6

• Split "Operation Time (seconds)" in two: "Raise Time" & "Lower Time" ?

  #117 opened 3 years ago by rbswift
  3

• rpitx

  #112 opened 3 years ago by zbyrek
  5

• How to understand if I have soldered the crystal properly?

  #106 opened 3 years ago by ybelakov
  18

• Option to reverse direction

  #111 opened 4 years ago by dckiller51
  6

• just a question: How to register remote controls via Pi-Somfy

  #124 opened 3 years ago by W11T
  7

• Transmitter is on permanently until first command is sent

  #120 opened 3 years ago by arthurdent2095
  1

• Somfy Smoove io

  #126 opened 3 years ago by zorbas78
  1

• Stuck On Entering MQTT Polling Loop

  #118 opened 3 years ago by Ben10lightningx
  2

• The program will not start from the command line or as a daemon

  #123 opened 3 years ago by schnef
  2

• MQTT Error

  #122 opened 3 years ago by cloudymark
  1

• Question

  #121 opened 3 years ago by ukrolelo
  1

• Question: finding shutter names

  #116 opened 4 years ago by Beramos
  8

• "My" position command from Home Assistant

  #105 opened 4 years ago by ocadik
  2

• Troubleshooting failure of only one shade

  #110 opened 4 years ago by nowellag
  4

• [Question / Feature Request] Home Assistant addon + ESP32/8622 nodes?

  #108 opened 4 years ago by 10bn
  2

• MQTT interface appears to hang

  #107 opened 4 years ago by yavinmaster
  5

• How to log to stdout?

  #109 opened 4 years ago by rbswift
  1