Issues
- 0
stepper motor minpulse width
#238 opened by hjoungjoo - 0
RA Steps getting re-set to absurd value
#237 opened by anjok - 0
USE_DUMMY_EEPROM = true gives compile errors
#236 opened by anjok - 1
esp32 build broken with version 1.12.6
#225 opened by dc6jn - 0
V1.11.5 : DEC limits not storred
#226 opened by astrokraken-fr - 2
Steppers Speed
#224 opened by edombek - 4
- 3
- 3
RA homing off the rails
#210 opened by anjok - 0
Introduce configuration versioning
#203 opened by andre-stefanov - 2
System freeze after Firmware "update"
#199 opened by stephanp66 - 3
XSDLL & XSDLU - ignoring argument
#192 opened by mwmason - 3
RA Stepper Motor with Sideral Tracking
#190 opened by AstrAuDobson - 1
Unable to compile the dec-auto-home branch (git pull date: 08-10-22)
#195 opened by Trigger-broom-289 - 5
unable to download
#194 opened by strutdevil - 5
Compiling Error redefinition of 'float fabsf'
#191 opened by sniperlucian - 10
Inverted GoTo. South America
#121 opened by nafital - 4
- 0
Inverted sync in DEC
#183 opened by Kerman-ap - 1
Wrong Longitude parsing offset.
#166 opened by anjok - 0
RA slews off end of ring
#152 opened by CTetford - 3
Nema17, Generic driver, Not tracking
#19 opened by waynoedm - 0
Enable pin incorrect when using generic driver
#155 opened by CTetford - 1
Add a Meade command to set both dec limits
#156 opened by anjok - 1
Add a Define so the end user can select whether the mount starts tracking on Power up or imitated by User
#150 opened by hdphilip - 2
RAMPS won't build
#154 opened by crashmaxx - 3
"AccelStepper" can be improved
#6 opened by jeromefavrou - 2
Problems with the focuser
#140 opened by lfpaca - 2
- 2
Dynamic Motor Torque Control
#33 opened by CTetford - 3
Problems on the DEC axis for the southern hemisphere
#132 opened by allafs - 2
- 0
- 1
"Unknown" board type crashes OATControl
#105 opened by hexafluoride - 12
Upload fail =(
#103 opened by nafital - 0
Incorrect DEC slew calculations
#104 opened by trishmapow - 0
Will not compile Nema 17 and Auto PA
#102 opened by stefi01 - 7
Devel branch seems to be building all versions
#88 opened by rwillett - 3
ESP32 with "default" DISPLAY_TYPE_LCD_KEYPAD
#75 opened by Viper-Gtr - 0
Improved Tx-Only UART Test
#34 opened by CTetford - 2
"default_envs" in platormio.ini is commented out
#71 opened by waynoedm - 0
- 0
Build broken for Arduino IDE
#51 opened by julianneswinoga - 1
Github "About" link is a dead end
#23 opened by Bodmer - 1
- 1
ESP32 AP Mode
#35 opened by red-gee