PrintMakerLab/mks-wifi-plugin

Issues

• M30 command not working for Tevo Tarantula

  #413 opened 5 months ago by BenTdesign
  7

• Manual command always in upper case

  #414 opened 5 months ago by Jeredian
  0

• Send file to printer failed

  #368 opened 2 years ago by halbik
  2

• No printer controls in monitor tab

  #412 opened 7 months ago by martosource
  3

• MKS Tinybee support

  #346 opened 2 years ago by LuisManoBatista
  2

• [1.4.4] Plugin crashes with unassigned variable alert.

  #403 opened 9 months ago by gostapps
  4

• Referencing 'simage' before first use.

  #409 opened 9 months ago by rburema
  3

• Disconnect and reconnect multiple times

  #351 opened 2 years ago by enishi1357
  7

• [DEV] Release 1.4.5

  #406 opened 9 months ago by Jeredian
  1

• [DEV] Release 1.4.4

  #392 opened 10 months ago by Jeredian
  0

• [1.4.4] Cura 5.5.0 constantly disconnects and reconnects from printer Neptune 2s

  #402 opened 9 months ago by NXS26
  7

• No option to save as TFT

  #352 opened 2 years ago by mattinflorence
  5

• MKS tinybee issue with endstops

  #367 opened 2 years ago by asimations
  1

• No image preview on printing after upload

  #354 opened 2 years ago by LukasJasin
  2

• Unable to Connect - Connect Button Not Working

  #376 opened a year ago by mabbott093
  1

• Update documentation over the project

  #397 opened 9 months ago by Jeredian
  0

• Verify Issue and Pull Request Labels

  #395 opened 10 months ago by Jeredian
  0

• stuck in a state of half-connection through Cura

  #370 opened 2 years ago by InvalidArgument3
  0

• Support model preview for Elegoo Neptune and Artillery Sidewinder series

  #366 opened 10 months ago by Kungvald
  4

• Connecting and Disconnecting constantly

  #390 opened a year ago by Nixellion
  1

• several module

  #383 opened a year ago by kmz45z
  2

• Switch from hub to gh CLI

  #387 opened a year ago by Jeredian
  0

• [DEV] Release 1.4.3

  #373 opened a year ago by Jeredian
  0

• Cura "Binding loop" warnings

  #372 opened a year ago by Jeredian
  0

• Support the 8.6.0 version of SDK for Cura 5.6.x

  #379 opened a year ago by Jeredian
  0

• Update repo after migration

  #380 opened a year ago by Jeredian
  0

• Cannot delete/print file on sdcard using FlyingBear 4s (drive_prefix is a null string)

  #371 opened a year ago by barban-dev
  2

• Add Port with the address

  #369 opened a year ago by danielscatigno-ncpc
  1

• No preview on Elegoo Neptune 3 Pro

  #365 opened a year ago by jaegerschnitzel
  6

• Printing Time and Estimated Time left broke after Estimiated time left is shown

  #364 opened 2 years ago by Umbomatumbo
  1

• “Start printing after uploading files” doesn't work

  #357 opened 2 years ago by qq331212627
  2

• [DEV] Release 1.4.2

  #361 opened 2 years ago by Jeredian
  0

• Add disk drive prefix to add compatibility to different fw

  #358 opened 2 years ago by Elkin-Vasily
  0

• Failed to start print after upload

  #350 opened 2 years ago by enishi1357
  3

• Printer reboots when file sent to print if file name contain russian letters

  #353 opened 2 years ago by VaLLDaR
  1

• [1.4.1] Window for response to a command

  #345 opened 2 years ago by bellzw
  3

• Support Hellbot Magna SE 32 Bits preview image size

  #343 opened 2 years ago by kaakeee
  4

• Upload error on FlyingBear Ghost 5

  #344 opened 2 years ago by nfalco79
  1

• Printer reboots when printing starts

  #340 opened 2 years ago by PingWIn87
  5

• Issue template update

  #337 opened 2 years ago by Elkin-Vasily
  0

• Printer reboot at print start

  #341 opened 2 years ago by Elkin-Vasily
  0

• Flying Bear Ghost 5 disconnecting/connecting constantly

  #336 opened 2 years ago by pretenda
  1

• [DEV] Release 1.4.1

  #331 opened 2 years ago by Jeredian
  0

• Support the 8.1.0 version of SDK for Cura 5.1+

  #332 opened 2 years ago by Jeredian
  0

• Continuous connection and disconnection to WiFi

  #316 opened 2 years ago by Fulvio1
  5

• Fix sonarqube code smells

  #328 opened 2 years ago by Jeredian
  0

• Major feature label

  #322 opened 2 years ago by Elkin-Vasily
  0

• The setting button is gone.

  #320 opened 2 years ago by runfortop
  5

• Cura 5.0, MKS Plugin 1.4.0. Cannot connect to machine.

  #315 opened 2 years ago by FedorSosnin
  15

• Monitor Tab auto open not working

  #318 opened 2 years ago by Elkin-Vasily
  0