RViMLab/h_rcm_vs_ws

This workspace implements an exemplary use cases for homography-based 2D visual servoing with remote center of motion constraint

Homography-based 2D Visual Servo with Remote Center of Motion Workspace

This workspace implements an exemplary use cases for homography-based 2D visual servoing with remote center of motion constraint. It is based upon 4 main packages

• rcm, implements an abstract task remote center of motion gain controller
• h_vs, implements the desired homography generation, and the visual servo to compute the desired camera frame twist velocity
• h_rcm_vs, implements the specific task for the abstract rcm package
• fri_ros, handles the communication to the KUKA LBR Med via the fast robot interface

To build this code, do

mkdir -p calibration_pattern_h_rcm_vs/src && cd calibration_pattern_h_rcm_vs/src
git clone --recursive https://github.com/RViMLab/h_rcm_vs_ws && cd ..

Then, for the simulated setup do

catkin_make -DCATKIN_BLACKLIST_PACKAGES="decklink_ros" && source devel/setup.bash

For the real setup do

catkin_make -DDECKLINK_SDK_DIR="path/to/Blackmagic_DeckLink_SDK" && source devel/setup.bash

All examples are explained below.

Calibration Pattern

This visual servo computes a desired homography from a calibration pattern. To run this example, open 3 terminals and do

roslaunch lbr_storz_endoscope_moveit moveit_planning_execution.launch sim:=true  # initializes robot

where sim can be set to false for use on the real robot. In case of a real setup, also launch a camera, for example, open a 4th terminal and do

roslaunch h_rcm_vs decklink_storz_endoscope.launch

In the 2nd terminal do

roslaunch h_rcm_vs rcm_init.launch image_topic:=/lbr/storz_endoscope_camera/image_raw  # initializes random endoscope position

For the real setup, do

roslaunch h_rcm_vs rcm_init.launch \
    image_topic:=/decklink/crop/image_raw \
    url:=package://h_rcm_vs/config/decklink_storz_endoscope_calibrationdata/ost.yaml  # initializes random endoscope position

In a 3rd terminal, do

roslaunch h_rcm_vs h_rcm_calibration_pattern_vs.launch image_topic:=/lbr/storz_endoscope_camera/image_raw  # launches the visual servo

The h_vs_node and h_gen_calibration_pattern_node or h_gen_endoscopy_calibration_pattern_node nodes within this launch file also load a calibration file, therefore, for a real setup do

roslaunch h_rcm_vs h_rcm_endoscopy_calibration_pattern_vs.launch \
    image_topic:=/decklink/crop/image_raw \
    cname:=decklink url:=package://h_rcm_vs/config/decklink_storz_endoscope_calibrationdata/ost.yaml  # launches the visual servo

Stored Views

Endoscope

In this mode, the user has the ability to move the robot via a GUI and to capture images along the way. In the process, a graph with images as nodes is built that can be used for servoing. To run, open 2 terminals and do

roslaunch lbr_storz_endoscope_moveit moveit_planning_execution.launch sim:=true  # initializes robot

where sim can be set to false for use on the real robot. In case of a real setup, also launch a camera, for example, open a 3rd terminal and do

roslaunch h_rcm_vs decklink_storz_endoscope.launch

In the second terminal do

roslaunch h_rcm_vs h_rcm_endoscopy_stored_views_vs.launch

For the real setup do

roslaunch h_rcm_vs h_rcm_endoscopy_stored_views_vs.launch \
    image_topic:=/decklink/crop/image_raw \
    cname:=decklink url:=package://h_rcm_vs/config/decklink_storz_endoscope_calibrationdata/ost.yaml \
    sim:=false  # launches the visual servo

Tilt Endoscope

Same as endoscope, but tiltable. To run, open 2 terminals and do

roslaunch lbr_storz_tilt_endoscope_moveit moveit_planning_execution.launch sim:=true  # initializes robot

where sim can be set to false for use on the real robot. In case of a real setup, also launch a camera, for example, open a 3rd terminal and do

roslaunch h_rcm_vs decklink_storz_tilt_endoscope.launch

In the second terminal do

roslaunch h_rcm_vs h_rcm_endoscopy_stored_views_vs_tilt_endoscope.launch

For the real setup do

roslaunch h_rcm_vs h_rcm_endoscopy_stored_views_vs_tilt_endoscope.launch \
    image_topic:=/decklink/crop/image_raw \
    cname:=decklink url:=package://h_rcm_vs/config/decklink_storz_tilt_endoscope_calibrationdata/ost.yaml \
    sim:=false # launches the visual servo

Exoscope

In this mode, the user has the ability to move the robot via a GUI and to capture images along the way. In the process, a graph with images as nodes is built that can be used for servoing. To run, open 2 terminals and do

roslaunch lbr_storz_exoscope_moveit moveit_planning_execution.launch sim:=true  # initializes robot

where sim can be set to false for use on the real robot. In case of a real setup, also launch a camera, for example, open a 3rd terminal and do

roslaunch h_pose_vs decklink_storz_exoscope.launch

In the second terminal do

roslaunch h_pose_vs h_pose_exoscope_stored_views_vs.launch

For the real setup do

roslaunch h_pose_vs h_pose_exoscope_stored_views_vs.launch \
    image_topic:=/decklink/crop/image_raw \
    cname:=decklink url:=package://h_pose_vs/config/decklink_storz_exoscope_calibrationdata/ost.yaml \
    sim:=false  # launches the visual servo

Deep Servos

• different servos with h_gen_node.py, and flags

Known Limitations

• There are some incompatabilities with Pyhton3, ROS, and OpenCV, see stack overflow. It can be solved by performing an extended sourcing.