Ralim/IronOS

Issues

• TS80P reading room temperature too high after upgrade to IronOS 2.22

  #1986 opened a month ago by nikolasgd
  14

• Add support for Solder Ninja Pen

  #1989 opened 18 days ago by nschurando
  1

• TS80P only negotiating 5V on QC3

  #1988 opened 19 days ago by AmazingSpanoMan
  0

• Pinecil V2 Not Powering with SmallRig VB99 Pro Battery

  #1974 opened 2 months ago by CommonlyUsedWords
  1

• Alientek T80/T80P

  #1945 opened 4 months ago by vulpes2
  2

• TS80P auto orientation is reversed

  #1983 opened 2 months ago by emlyn
  2

• Piezoelectric buzzer/beeper support

  #1981 opened 2 months ago by FleXoft
  5

• Enable Accelerometer Data Access via Bluetooth Low Energy (BLE)

  #1899 opened 8 months ago by Defozo
  4

• Pinecil V2 has erroneous temp spikes in companion

  #1915 opened 6 months ago by vguttmann
  14

• Graphical glitch on the voltage reading - TS101

  #1972 opened 3 months ago by mattia777
  2

• Support Miniware MHP50?

  #1872 opened 10 months ago by SimGas
  28

• STM32 died after flash read.

  #1882 opened 9 months ago by therealuzr
  13

• TS80P screen orientation upside down

  #1849 opened 4 months ago by GrigoriOH
  19

• Pinecil V2: randomly "leaves PD3.1", falls back to to 5 V

  #1936 opened 5 months ago by Nickduino
  4

• Uninstall IronOS firmware?

  #1971 opened 3 months ago by jockethebastard
  1

• Documentation: Formulas on Power & Performance aren't formatted correctly

  #1962 opened 3 months ago by Christoph-AK
  0

• Feature request: Timer for sleeping with hall sensor

  #1968 opened 3 months ago by aveao
  1

• TS100 Thermal Runaway Retune/Option to disable

  #1946 opened 4 months ago by Tekz42
  1

• Cannot see custom logo on TS101

  #1933 opened 5 months ago by johncohn
  3

• Pinecil v2 won't power on with anything but 5v

  #1959 opened 4 months ago by greenwoodma
  5

• MHP30: Temperature stability

  #1958 opened 4 months ago by Ralim
  7

• TS101 reboots with MacBook M2 Pro PD

  #1887 opened 9 months ago by nuschpl
  8

• Sequre S99 Support (C245 tips)

  #1950 opened 4 months ago by MmaxX09
  3

• Sequre S60P USB-PD selection

  #1931 opened 4 months ago by kabel42
  3

• Language Pack in Original Firmware

  #1953 opened 4 months ago by wsedits01
  4

• Support Sequre T55 hot plate

  #1885 opened 4 months ago by jbur4556
  14

• Change Date Format to YYYY-MM-DD

  #1951 opened 4 months ago by BAM5
  4

• Profile mode: target temperature never settles

  #1939 opened 4 months ago by grinningmosfet
  2

• Should soldering mode be enabled on weak PD

  #1875 opened 10 months ago by firstnevyn
  5

• Support request: G3061 Hot-plate support

  #1930 opened 5 months ago by darknessblade
  2

• Startup Option behaviour on MH-30

  #1934 opened 5 months ago by wildblue
  0

• pts200 tip for ts101

  #1847 opened 8 months ago by lologolo
  10

• TS100_UK.HEX file language

  #1922 opened 6 months ago by AlexVikingos
  0

• miniware MHP30 only showing yellow light and voltage

  #1909 opened 6 months ago by Piwio
  2

• Support for the power supply "SuperDart" standard

  #1921 opened 6 months ago by UZver24
  1

• Pinecil V2 negotiates too high PD voltage overloading 60W chargers and cables

  #1904 opened 6 months ago by 21micha37
  5

• Enhance the PD Debug Menu to Include E-Marker Chip Data

  #1914 opened 6 months ago by Garywoo
  0

• IKEA SJÖSS 30W charger does not work with Pinecil v2

  #1906 opened 6 months ago by positron96
  12

• L245p usb soldering iron

  #1910 opened 6 months ago by AbdurRoufBusiness
  2

• Dynamic temperature setting (automatic boost)

  #1908 opened 7 months ago by KondratokGK
  2

• MHP30 USB-PD Boot Failure

  #1878 opened 8 months ago by caffeinated-woodchuck
  3

• Problem In Understanding Language Code UK

  #1876 opened 8 months ago by onxblog
  5

• Not included dependency for unit tests

  #1886 opened 8 months ago by nuschpl
  7

• MHP 50 Overtemperature

  #1879 opened 9 months ago by TowerDefender007
  2

• TS101 only working in QC mode with PD3.1 Powerbank

  #1851 opened a year ago by w00lfy111
  21

• How do I use a Bootup logo on TS101 on V 2.01

  #1859 opened a year ago by MaxiscooI
  6

• Possible bug: false live temperature spikes in v2.22 on Pinecil

  #1873 opened 10 months ago by builder555
  4

• Disable Bluetooth by default to minimize attack vectors

  #1856 opened a year ago by rspeed
  5

• Pinecil V2 won't switch to 20V on 5v/20v only capable powerbank

  #1853 opened a year ago by kitor
  6

• MHP30 Lower minimum temperature than 100C?

  #1848 opened a year ago by Combinacijus
  6