RobTillaart/DHTNew

Issues

• Add / update the diagnostic tool

  #98 opened 2 months ago by RobTillaart
  1

• AM2322 Humidity 99.9 Temp OK

  #97 opened 8 months ago by pacmac
  23

• Small documentation improvement: add unity

  #95 opened 8 months ago by koocotte
  2

• Shows wrong type

  #94 opened 9 months ago by MickyRoth
  3

• Problem: wrong values at negative temperatures an ESP8266 and DHT22

  #52 opened 4 years ago by argltuc
  16

• consider an enhancement to be able to compile this lib directly under espressif/platformio without Arduino layer

  #91 opened 2 years ago by pabloandresm
  4

• Parallel processing of multiple Sensors

  #92 opened 2 years ago by toine-at-est
  7

• "Sensor not ready," meaning

  #31 opened 4 years ago
  24

• Ticker compatibility

  #88 opened 2 years ago by vsmaldino
  12

• Add support for the AM2320, AM2321 and AM2322.

  #89 opened 2 years ago by RobTillaart
  0

• read() hangs with MkrWiFi + MkrConnector Board

  #67 opened 3 years ago by ToineSiebelink
  66

• Compiler warning, conversion float to double

  #86 opened 2 years ago by pabloandresm
  7

• Sonoff Si7021 gives wrong temperature and humidity

  #84 opened 2 years ago by RobTillaart
  5

• Si7021 by Sonoff

  #79 opened 2 years ago by phiguimaran
  16

• Support for DS18B20

  #83 opened 2 years ago by simonbogh
  3

• DHT22 registers as type 70 in 0.4.14

  #81 opened 2 years ago by simonbogh
  12

• Support for SonOff Si7021

  #75 opened 2 years ago by Tomat7
  10

• Test sketch

  #78 opened 2 years ago by Sukalo0290
  4

• ESP32 error

  #76 opened 2 years ago by willy2764
  13

• replace internal storage float with int

  #26 opened 3 years ago by RobTillaart
  8

• setTempOffset and setHumOffset

  #74 opened 3 years ago by us292231
  3

• DTH11 gets too short start impulse

  #72 opened 3 years ago by arnowa
  16

• Sensors getting stuck at a certain value

  #59 opened 3 years ago by Aaron2550
  37

• Humidity values higher than 100%

  #63 opened 3 years ago by afonsoc12
  17

• F_CPU not defined for Arduino Nano RP2040 Connect

  #64 opened 3 years ago by RudolfAtHome
  3

• Fix negative temperature below -25.5°C

  #60 opened 4 years ago by RobTillaart
  1

• Still problems with measuring negative values (AM2301)

  #57 opened 4 years ago by matchacos
  4

• error yield() no se declaró

  #51 opened 4 years ago by germe-fur
  2

• Add reset() to set all parameters to default value.

  #45 opened 4 years ago by RobTillaart
  2

• function to get lastRead time...

  #47 opened 4 years ago by RobTillaart
  1

• pin setting at runtime

  #46 opened 4 years ago by app-vrb
  3

• read DHT11 with 3V3 logic/1Mhz

  #48 opened 4 years ago by betyar
  20

• Library seems to fail reading DHT22 with 3V3 logic/8Mhz

  #33 opened 4 years ago by ikatkov
  2

• error reading am2302 over longer wire

  #29 opened 4 years ago by Jurand2020
  80

• Thoughts about setting Humidity & Temperature to -999

  #23 opened 4 years ago by RobTillaart
  5

• Add enable / disable power supply pin

  #13 opened 4 years ago by RobTillaart
  7

• Question about Float

  #25 opened 4 years ago by Mr-HaleYa
  19

• Strange readings

  #11 opened 4 years ago by Mr-HaleYa
  113

• Adding name tag to sensor

  #2 opened 4 years ago by RobTillaart
  5

• Not update on platformio - libray.json problem

  #9 opened 4 years ago by fmatray
  18

• Need for calibrateReadDelay()

  #20 opened 4 years ago by RobTillaart
  4

• Make DHTLIB_BIT_THRESHOLD a compiler option

  #14 opened 4 years ago by RobTillaart
  0

• Warning! Ignoring broken library manifest

  #15 opened 4 years ago by alrabe
  1

• general questions

  #3 opened 5 years ago by Mr-HaleYa
  30

• Example needed for waitForRead flag

  #5 opened 5 years ago by RobTillaart
  4

• Remove humidity and temperature as public members.

  #6 opened 5 years ago by RobTillaart
  1

• Request about DHTnew

  #1 opened 5 years ago by NiamorV
  1