STMicroelectronics/STM32CubeWL

Issues

• Device is not setting the user data rate and tx power, on reset.

  #94 opened 2 months ago by ankit-bansal-oxit
  0

• SUBGHZ HAL driver using SPI polling and not DMA... too slow

  #66 opened 2 years ago by pieterconradie
  3

• Device not sending the acknowlegement for confirmed downlink to the gateway/LNS, in class B

  #93 opened 3 months ago by ankit-bansal-oxit
  1

• `SUBGRF_SetRfTxPower` interprets `power` argument incorrectly.

  #64 opened 2 years ago by Miceuz
  3

• LoRaWAN RTOS project hang up

  #69 opened 2 years ago by WisangAnggoro
  4

• HAL_GetTick() running 1.024x fast (v1.3.0)

  #61 opened 2 years ago by wolsty7
  7

• Maximum number of tasks in sequencer not triggering an error

  #52 opened 2 years ago by KaDw
  1

• Problems with file names when compiling on Linux

  #41 opened 2 years ago by lucasgranberg
  1

• FLASH_IF_INT_CLEAR_ERROR causes to hard fault

  #77 opened a year ago by fozayDost
  8

• Device crashes when uplink send after switching to class B.

  #89 opened 4 months ago by ankit-thealchemist
  2

• Integrating soil sensor into the Lorawan_End_node issue

  #92 opened 4 months ago by adamlqn
  1

• CUBE MX Exti generation issue

  #90 opened 4 months ago by MaxFlatline
  0

• SFR and SFD files are missing in Keil pack

  #88 opened 4 months ago by MaxFlatline
  3

• Support for STM32WL33

  #91 opened 4 months ago by vimalzxc
  2

• Support FreeRTOS with SBSFU

  #76 opened a year ago by hoai265
  2

• Too long hard coded delay in SUBGHZ_CheckDeviceReady()

  #65 opened 5 months ago by pieterconradie
  3

• Application hangs because MBMUXIF_LoraSendCmd() command stuck

  #80 opened 9 months ago by metaTinker
  4

• [LoRaMac] The use of the adrBlockFound variable in ProcessMacCommands is unknown

  #85 opened 7 months ago by wdfk-prog
  1

• SUBGRF_SetTxParams Pa config

  #82 opened 7 months ago by dbanello
  1

• STM32CubeWL Lorawan_End_node errors

  #81 opened 8 months ago by natgeolemme
  4

• LoRaWAN stack upgrade

  #79 opened 10 months ago by pd-vt
  1

• Missing include file

  #78 opened a year ago by Strooom
  1

• How to dual core on the NucleoWL55JC1 ?

  #62 opened a year ago by MrGloriousFast
  4

• NVM DATA RESTORED not working with STM32WLE5xB (fix included)

  #60 opened a year ago by Yoshi20
  3

• Sequencer: how does it work?

  #39 opened 2 years ago by zubel7
  8

• FUOTA on STM32WLE5?

  #38 opened a year ago by chris-mds
  3

• RF Transceiver doesn't support multihopping

  #73 opened a year ago by EmbeddedAyoub
  2

• SUBGRF_SetTx() & SUBGRF_SetRx(): SUBGHZ_WaitOnBusy() long blocking delay in HAL_SUBGHZ_ExecSetCmd()

  #70 opened 2 years ago by pieterconradie
  1

• Fragdecoder not working as expected sometimes.

  #75 opened a year ago by nilesh-dryad
  0

• Encountering Issues with UART1 in SubGHz_Phy_Per and STM32WL-SubGHz-PhyBasic-Tx-Rx examples for STM32WL LoRa Communication

  #63 opened a year ago by Javadbolboli
  5

• RTC Accuracy issue

  #56 opened a year ago by PG430
  6

• SecureElementSetDevEui is not working

  #74 opened a year ago by karthiclodpi
  2

• LoRaWAN Timer does not work with RTC_BINARY_MIX

  #72 opened a year ago by Jakub-Nagy
  1

• LPUART is not working inside SubGHz_Phy_PingPong

  #68 opened a year ago by crkco
  3

• RxParams.LinkCheck is never cleared

  #49 opened a year ago by J0hanss0n
  3

• Invalid arguments in SUBGRF_ClearDeviceErrors function

  #71 opened 2 years ago by b00bl1k
  1

• Rx Timeout on join when using the LSI clock

  #51 opened 2 years ago by rayaanlatief
  4

• Radio IRQ during HAL_SUBGHZ_ExecSetCmd causes infinite Radio IRQ handler re-entering

  #43 opened 2 years ago by RomanJasmann
  11

• DeviceEUI missing in LoRaWAN Commisioning .ioc file

  #59 opened 2 years ago by edchron
  1

• Initialize loraInfo structure to zero

  #53 opened 2 years ago by KaDw
  2

• Compilation error with USE_LRWAN_1_1_X_CRYPTO set to 1

  #54 opened 2 years ago by KaDw
  2

• For IN865 and EU868 Data Rate not changed for Join request retransmission

  #48 opened 2 years ago by PG430
  4

• RadioRandom() returns often just 0

  #46 opened 2 years ago by J0hanss0n
  4

• Join procedure fails after changing the AppKey

  #37 opened 2 years ago by PG430
  9

• Dead Lock during Retransmissions

  #45 opened 2 years ago by J0hanss0n
  2

• Any plans to update library here to V1.2.0?

  #36 opened 2 years ago by KaDw
  6

• LoRaMacChannelAdd is now working

  #55 opened 2 years ago by krispstack
  0

• RX event output after Join Request shows wrong DR

  #50 opened 2 years ago by J0hanss0n
  2

• SysTimeLocalTime returns incorrect month

  #47 opened 2 years ago by Shensenz
  1

• Incorrect address offsets for ITM

  #40 opened 2 years ago by gbThreepwood
  1