My Dotfiles.
- Dotfiles
- Table of Contents
- QuickStart
- Tips
- ssh-keygen
- SSH
- SSHD
- scp
- ssh-copy-id
- add ssh user ssh server
- FW (ssh-server)
- Set proxy
- Laptop power optimize
- Disable C6 States of Zen env
- Change dir lang
- Change audio sample-format and rate
- Disable mouse acceleration
- Change setting of GRUB2
- Vivaldi
- JetBrains Toolbox and InteIIj IDEA
- VSCode
- Xremap
- Systemd
- Links
https://github.com/ryojiagatsuma1004/dotfiles.git
cd dotfiles
chmod +x ./install.sh
./install.sh
# key generate
ssh-keygen -t ed25519 -C {comment}
# change password
ssh-keygen -f {private-key-path} -p
# basic usage
ssh -i {pub-key-path} -l {user} -p {port} {host-ip}
# multi-stage ssh
ssh -i {pub-key-path} -o ProxyCommand="ssh -W %h:%p -i {pub-key-path} -l {user} -p {port1} {host1-ip}" -l {user} -p {port2} {host2-ip}
# ssh over https
# 1. open port 443 of sshd
# 2. install corkscrew
ssh -i {pub-key-path} -o ProxyCommand="corkscrew {proxy-ip} {proxy-port} [authfile] %h %p" -l {user} -p 443 {host2-ip}
vim [authfile]
{user}:{passwd}
# only ssh local port forwarding
ssh -i {pub-key-path} -N -b {host1-nic-ip or 127.0.0.1} -L {port1}:{host2}:{port2} -l {user} -p {port} {host-ip}
# only ssh remote port forwarding
ssh -i {pub-key-path} -N -b {host1-nic-ip or 127.0.0.1} -R {port1}:{host2}:{port2} -l {user} -p {port} {host-ip}
# SSH dynamic port forwarding
# connect to socks://127.0.0.1:{port}
# can com via ssh server
ssh -i {pub-key-path} -D {port} -l {user} -p {port} {host-ip}
Make alias
vim ~/.ssh/config
Host alias1
HostName {host1-ip}
Port {port}
User {user}
IdentityFile {private-key-path}
ForwardX11 no
TCPKeepAlive {yes}
ServerAliveInterval {120}
Host mss
HostName {host2-ip}
Port {port}
User {user}
IdentityFile {private-key-path}
# %h is {host2-ip}, %p is {port}
ProxyCommand ssh -W %h:%p alias1
Host soh
HostName {host1-ip}
Port 443
User {user}
IdentityFile {private-key-path}
ProxyCommand "corkscrew {proxy-ip} {proxy-port} [authfile] %h %p"
Host lf
HostName {host-ip}
Port {port}
User {user}
IdentityFile {private-key-path}
BindAddress {host1-nic-ip or 127.0.0.1}
LocalForward port1 host2:port2
Host rf
HostName {host-ip}
Port {port}
User {user}
IdentityFile {private-key-path}
BindAddress {host1-nic-ip or 127.0.0.1}
RemoteForward {port1} {host2:port2}
Host df
HostName {host-ip}
Port {port}
User {user}
IdentityFile {private-key-path}
DynamicForward {port}
ssh alias1
ssh mss
ssh lf
ssh rf
ssh df
vim sudo vim /etc/ssh/sshd_config
# change port
# Port 22
Port 20022
# add port
Port 20022
Port 30022
...
# disable password
PasswordAuthentication no
# deny user of empty password
PermitEmptyPasswords no
# :wq
# reboot sshd
sudo systemctl restart sshd.service
File transfer.
scp -i {~/.ssh/id_gcp.pub} {localfile} -P {port} {user}{@34.82.195.120}:{dir}
# Send pub key to remote host
ssh-copy-id -i {public-key-path} -P {port} {user}@{host-ip}:{dir}
ssh sshd-server
curl -o ssh-user-add.sh https://raw.githubusercontent.com/ryojiagatsuma1004/dotfiles/master/scripts/ssh-user-add.sh
chmod +x ./ssh-user-add.sh
./ssh-user-add.sh -u {username} -p {public-key-path}
sudo ufw default DENY
sudo ufw limit {ssh-port}/tcp
sudo ufw enable
Note escape characters.
export http_proxy="http://username:password@foobar.com:8080"
export https_proxy="http://username:password@foobar.com:8080"
git config --global http.proxy http://username:password@foobar.com:8080
git config --global https.proxy http://username:password@foobar.com:8080
vim /etc/dnf/dnf.conf
proxy=http://proxy.tylersguides.com:3128
proxy_username=dnf
proxy_password=password
sudo vim /etc/apt/apt.conf
Acquire::http::Proxy "http://username:password@foobar.com:8080"
Acquire::https::Proxy "http://username:password@foobar.com:8080"
pip3 --proxy=http://username:password@foobar.com:8080 install numpy
$ sudo dnf install tlp
$ sudo tlp start
Load msr modules when loading OS
sudo vim /etc/modules-load.d/modules.conf
msr
Auto disable c6 states at boot time
git clone https://github.com/joakimkistowski/amd-disable-c6.git
cd amd-disable-c6/
sudo make install
sudo systemctl enable amd-disable-c6.service
sudo systemctl start amd-disable-c6.service
reboot
If you want to be disable c6 at one time...
git clone https://github.com/r4m0n/ZenStates-Linux.git
cd ZenStates-Linux/
# disable c6
sudo python zenstates.py --c6-disable
# check state
sudo python zenstates.py -l
LANG=C xdg-user-dirs-gtk-update
sudo vim /etc/pulse/daemon.conf
;; default-sample-format = s16le
;; default-sample-rate = 44100
default-sample-format = s24le
default-sample-rate = 96000
pulseaudio -k
sudo dnf install gnome-tweaks
dgnome-tweaks
Keyboard & Mouse -> Mouse -> Acceleration Profile -> Flat
sudo vim /etc/default/grub
sudo grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Download here and install.
sudo dnf install vivaldi-xx.x86_64.rpm
Download here and install.
cd DOWNLOAD_DIR
tar fvx jetbrains-toolbox-xx.tar.gz
./jetbrains-toolbox-xx/jetbrains-toolbox
Install IDEA.
toolbox -> Tools -> IDEA -> Install
Add PATH of IDEA.
toolbox -> Tools -> IDEA -> Settings -> Configuration -> Geterate shell scripts => Enable
Shell scripts location => $HOME/bin
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
And install
dnf check-update
sudo dnf install code
- Env
- Keysetting
# If change service file, run it.
systemctl --user daemon-reload
# Start and Enable service
systemctl --user start SERVICE
systemctl --user enable SERVICE
# If change .xremap, run it.
systemctl --user restart SERVICE