Scottapotamas/stm32-camera

Issues

• SD mount fails on first powerup, after software reboot is ok

  #15 opened 7 years ago by Scottapotamas
  0

• SD Card Support

  #11 opened 7 years ago by Scottapotamas
  0

• IR cut switching uses a blocking delay

  #14 opened 7 years ago by Scottapotamas
  0

• Select different LDO on next boards.

  #13 opened 7 years ago by Scottapotamas
  0

• Regulator output voltage is wrong

  #12 opened 7 years ago by Scottapotamas
  3

• Validate phototransistor performance in lens mount

  #4 opened 7 years ago by Scottapotamas
  2

• Add RC snubber for IR-Cut solenoid

  #5 opened 7 years ago by Scottapotamas
  2

• Button is too close to SWD header

  #10 opened 7 years ago by Scottapotamas
  0

• SDIO track length matching

  #2 opened 7 years ago by Scottapotamas
  0

• Sensor control/data line length matching

  #3 opened 7 years ago by Scottapotamas
  0

• Investigate red LED issue

  #9 opened 7 years ago by Scottapotamas
  1

• Auto-baudrate detection

  #8 opened 7 years ago by Scottapotamas
  0

• Pinout needs the 'spare' GPIO pins to support wake

  #1 opened 7 years ago by Scottapotamas
  1

• CubeMX layout lags behind schematic

  #7 opened 7 years ago by Scottapotamas
  0

• Board lacks silkscreen information

  #6 opened 7 years ago by Scottapotamas
  1