Keep_alive not working
HappyPlotter opened this issue · 5 comments
Describe the bug
The thermostat is controlling a shelly device. I have enabled the keep_alive to 1 minute and in the shelly I have the timer off set to 10 minutes. Normally the timer should be reset back to 10 minutes every keep_alive period so every minute in my configuration
To Reproduce
Set the keep_alive to 1 minute and check if it updates the value
Additional context
keep_alive works fine with generic thermostat, it is not woking correctly with dual thermostat
In my case, i relatively fixed this by setting min_cycle_duration, and its seems to work
I have minimum cycle set but it does not fix the keepalive. I have not made an automation that every minute turns on the shelly. Which essentially "keeps alive"
I have minimum cycle set but it does not fix the keepalive. I have not made an automation that every minute turns on the shelly. Which essentially "keeps alive"
Please test the alpha release v2024.6.2-alpha1, if it fixes it I'll make it official.
It might take a while until I get my hands on another shelly. The one that is on the heater is not easy to be removed/tested since now we have 35+ degrees
Disconnect the heater, and plug the Shelly on a light (or an ohmmeter if it's a dry contacts relay switch).