ScratMan/HASmartThermostat

Issues

• Erroneous switching behavior

  #271 opened 10 days ago by T81
  1

• General PID functionality requested

  #270 opened 15 days ago by heikone
  0

• Issue after upgrade to 2024.11.0+1 - helpers/translation.py:226

  #257 opened 16 days ago by pos-ei-don
  8

• All smart_thermostats reports state = Unavailable

  #262 opened a month ago by tonkinbay
  7

• Mixed entity types for heating and cooling not supported

  #269 opened 20 days ago by JasonGehring
  0

• Autotune Peak Count Not Incrementing Despite Valid Oscillations

  #268 opened 20 days ago by qukla1000
  0

• Keep_alive not working

  #201 opened 20 days ago by HappyPlotter
  5

• Integral resets on HA restart

  #266 opened 21 days ago by andreid1303
  8

• New PID i behavior?

  #265 opened 21 days ago by HermesHonshappo
  4

• Output higher than 100 (e.g. up to 255)

  #254 opened 22 days ago by Xitee1
  4

• Switch not operating

  #264 opened a month ago by leemurphy91
  0

• Generic Controller

  #234 opened 3 months ago by jeffcybulski
  1

• Cool only

  #263 opened a month ago by remezen
  0

• invert_heater bug

  #261 opened a month ago by RuslanKADR
  1

• control_output above output_max

  #258 opened a month ago by vasyna
  2

• PID MODE NOT "AUTO" BY DEFAULT

  #252 opened 2 months ago by 96Ems
  3

• Valve not controllable by smart thermostat and warning about missing entities

  #259 opened a month ago by maxeitelwein
  4

• Limit/Reduce updates to heater: when PWM=0

  #240 opened 3 months ago by pos-ei-don
  1

• Integration of HASmartThermostat with Homematic IP Thermostats and Zigbee Outlet

  #224 opened 6 months ago by Andykakau
  9

• Restart autotune.

  #194 opened a year ago by sebsebseb1982
  1

• Heating not immediately starting - "Cycle is too short"

  #251 opened 2 months ago by somerandoname
  1

• Switch turning ON despite temperature way over target

  #250 opened 2 months ago by wmoc
  1

• On / off feature during specific hours for floor heating

  #249 opened 2 months ago by chungalunga
  0

• Output values are ignored

  #243 opened 3 months ago by geduxas
  1

• Heating and Cooling for underfloor water tubes

  #242 opened 3 months ago by rudiratlos
  1

• Controlling gas boiler

  #235 opened 3 months ago by AlexHighTower
  3

• output_max is not working

  #241 opened 3 months ago by leelouch
  0

• hvac_action does not change to idle in some cases

  #239 opened 3 months ago by thomas2403
  3

• Set Preset Mode not working if a temp isn't defined in YAML

  #237 opened 3 months ago by mutasim
  3

• Homematic Actor not available

  #236 opened 3 months ago by JarlMorgennebel
  3

• heater is always required: cooler only setup

  #226 opened 5 months ago by AJolly
  1

• heater: Referenced entities are missing or not currently available

  #225 opened 6 months ago by chungalunga
  5

• How to set heater control output to be an integer and how to set a max value (ex: 99 and not 100)

  #222 opened 6 months ago by leelouch
  1

• Deprecation warning

  #219 opened 6 months ago by TTLucian
  2

• Failsafe don't work when sensor not available / output_safety & sensor_stall

  #220 opened 7 months ago by gryzli133
  1

• Feature request - Multiple heater entities

  #213 opened 8 months ago by herrar1
  2

• specific configuration seems to be ignored

  #214 opened 9 months ago by echavet
  2

• thermostat in off mode still controlls devices

  #218 opened 9 months ago by ploeffler
  1

• Handling of heater control device connectivity issues - Heater controller stays on

  #196 opened a year ago by papadi
  2

• pwm timeout boiler run

  #212 opened 10 months ago by RunacKim
  0

• All entities are unavailable after update

  #209 opened 10 months ago by adamchemiawppl
  4

• Parameters cannot be changed retrospectively (away_temp, sleep_temp; home_temp; eco_Themp)

  #205 opened a year ago by LHBL2003
  5

• If 'ke' is in use make it possible to let 'i'<0

  #208 opened 10 months ago by AnHardt
  2

• HA 2024.2 log warning

  #206 opened 10 months ago by stanol
  1

• Compensate for other heat sources (instantly, without integral resettling)

  #190 opened a year ago by jasperweiss
  2

• pid_p pid_d

  #195 opened a year ago by gkrallo
  3

• Strange behavior with 2024.1 ha

  #197 opened a year ago by andyinno
  2

• Cant update PID values

  #193 opened a year ago by dawiduniec
  5

• Thermostat resetting to minimum value

  #191 opened a year ago by asdkjasdfla
  0

• Boost mode enhancement

  #189 opened a year ago by Mikescotland
  0