Snapmaker/Snapmaker2-Controller
Snapmaker2-Controller is the firmware for Snapmaker 2.0 3-in-1 3D Printers.
CGPL-3.0
Issues
- 1
Please implement DISTINCT_E_FACTORS
#282 opened by Jonnie-Cache - 0
About the actions after the file is uploaded
#326 opened by YenShihHung - 1
Snapmaker 2 doesn't understand GCodes about removable storage, such as M21 (initialize SD)
#308 opened by BurntVoxel - 0
- 0
M600 Code has a delay
#324 opened by Verpohlt - 1
- 1
- 1
- 0
10W laser reduced intensity using inline mode
#320 opened by Delimanator - 0
Stop raising Z to max after job
#319 opened by skemp117 - 0
Add move to work origin button
#318 opened by skemp117 - 5
Dual Extruder: Z-Height Auto Calibration results in ~0.3mm too high Z-position
#297 opened by caerandir - 0
- 0
Turn off Door Detection from running job
#315 opened by rbcapp - 0
- 0
- 0
Second extruder printing a cm too high
#309 opened by nfmaas - 2
G1029 A does not allow dual extruder?
#299 opened by silvanusbuyesti - 0
- 1
M600 Behavior with Dual Extruder
#298 opened by eacmen - 0
Emergency stop button not powering off laser
#305 opened by David-Merlow - 0
Load limit on axis with 3DP and Laser (not CNC)
#304 opened by poltpolt - 0
- 0
- 0
Single Extruder load/unload issue
#300 opened by jenkins007 - 0
Control App gets stuck when dual extruder head is attached with only one hotend in place
#293 opened by caerandir - 0
Can't load filament to right nozzle during X/Y calibration wizard (Dual Extruder)
#292 opened by caerandir - 0
- 1
Laser Pause "forgets" relative positioning
#288 opened by caerandir - 0
How can I change the starting z-height when performing manual bed leveling?
#290 opened by dkskzmffps - 1
Laser does not lift on pause
#287 opened by mads0100 - 3
- 0
Dual printer head not registering
#286 opened by Learoy1 - 0
HAL_DUE folder missing
#283 opened by ComboKings - 0
Layer shifting
#271 opened by oldlaurs - 0
- 1
Settings lost after shutdown-restart
#264 opened by oldlaurs - 0
Calibration Remove Redundant Manual Input
#260 opened by jenkins007 - 0
- 0
Download
#257 opened by Dustincrowns - 0
Enable cross-origin resource sharing
#255 opened by loranger - 0
- 9
Snapmaker Losing calibration data on reboot.
#248 opened by pkdhital - 1
- 12
Inline laser power problem lightburn/maybe others
#243 opened by quazzie - 3
Feature Request - Octopi with OctoDash on Screen
#253 opened by bf8392 - 1
- 0
Laser height changes every time the machine turns on
#245 opened by ave8tor - 0
- 1
Can we have support for ExFAT flash drives?
#239 opened by NomadicVoxel