pimatic-plugin-mySensors

Note: beta version

Pimatic plugin supporting MySensors as controller. (http://mysensors.org/)

Controllers

Support for following sensors

Temperature and Humidity ( http://mysensors.org/build/humidity)
Temperature and Pressure ( http://mysensors.org/build/pressure)
Motion ( http://mysensors.org/build/motion )
Relay-Actuator ( http://www.mysensors.org/build/relay )
TimeAware Sensor support ( Unix time seconds )
Binary buttom ( http://www.mysensors.org/build/binary )
Dimmer
Light Sensor
Gas Sensor ( ppm )
PulseMeter ( experimental only support wattage )
Battery level of multiple sensors
more to be add.. :)

Gateways

Gateway can be anything from for arduino serial gateway or Raspberry pi

NRF24L01+ connected to raspberry pi SPI. (using https://github.com/mysensors/Raspberry ) ( SPI core clock changes and never works. if pi is overclock , so avoid it )
Serial Gateway (http://mysensors.org/build/serial_gateway)

Pimatic Configuration changes

Configuration

You can load the plugin by editing your config.json to include:

{
      "plugin": "mysensors",
      "driver": "serialport",
      "protocols": "1.4.1",
      "startingNodeId": 1,
      "driverOptions": {
      "//": "'/dev/ttyUSBx' if using serial Gateway",
      "serialDevice": "/dev/ttyMySensorsGateway", 
      "baudrate": 115200
      }
}

in the plugins section.

Devices

Note: To enable battery level with sensor. set ["batterystat"] to true. see temp & Hum exp. support is enable for all sensor except PIR,Switch. for PIR or switch use configure seperate battery devices.

Temperature and Humidity

Devices must be added manually to the device section of your pimatic config.

This is the basic sensor with only temperature and humidity

 {
      "id": "DHT11",
      "name": "DHT11",
      "class": "MySensorsDHT",
      "nodeid": 10,
      "batterySensor": true,
      "sensorid": [
        0,
        1
      ]
    }

Temperature and Pressure

 {
      "id": "BMP",
      "name": "BMP",
      "class": "MySensorsBMP",
      "nodeid": 10,
      "batterySensor": true,
      "sensorid": [
        0,
        1,
        2
      ]
    }

Motion sensor PIR

    {
      "id": "PIR",
      "name": "PIR",
      "class": "MySensorsPIR",
      "nodeid": 10,
      "sensorid": 2,
      "resetTime": 8000
    },

Relay-Actuator

 {
      "id": "Switch",
      "name": "Switch",
      "class": "MySensorsSwitch",
      "nodeid": 10,
      "sensorid": 1
    },

Dimmer

 {
      "id": "Dimmer",
      "name": "Dimmer",
      "class": "MySensorsDimmer",
      "nodeid": 10,
      "sensorid": 1
    },

Binary Button

  {
      "id": "Door",
      "name": "Door",
      "class": "MySensorsButton",
      "nodeid": 12,
      "batterySensor": true,
      "sensorid": 1
  },

Battery levels

  {
      "id": "Battery",
      "name": "Batterylevel",
      "class": "MySensorsBattery",
      "nodeid": [
      11,
      12,
      13
      ]
  },

Light sensor ( 0 to 100 )

  {
      "id": "Light",
      "name": "Light",
      "class": "MySensorsLight",
      "nodeid": 15,
      "batterySensor": true,
      "sensorid": 2
  }

Gas sensor ( ppm )

  {
      "id": "GasSensor,
      "name": "GasSensor",
      "class": "MySensorsGas",
      "nodeid": 14,
      "batterySensor": true,
      "sensorid": 3
  }

Pulse sensor ( Watt, KWh and Ampere )

  {
      "id": "EnergySensor,
      "name": "Energy Sensor",
      "class": "MySensorsPulseMeter",
      "nodeid": 3,
      "batterySensor": true,
      "sensorid": 1,
      "appliedVoltage"  : 220
  }