Tunas1337/UV-K5-Modded-Firmwares

Issues

• Welcome to UV-K5 Modded Firmwares Discussions!

  #62 opened a year ago by PE1DDA
  1

• Error in "python squelch_table_read.py"

  #61 opened a year ago by frosty-13
  4

• k5_v2.01.19_mod_AM_18to850mhz.bin Add files via upload ( radio responds slowly or not at all after this file )

  #60 opened a year ago by briantje1991
  1

• Please replace these firmwares with new ones

  #58 opened a year ago by sq5bpf
  9

• FM Broadcast band tx

  #55 opened a year ago by ifuchs
  2

• Add Hearing Assist Frquency Range to FM broadcast function

  #56 opened a year ago by Arddie-Dweebo
  1

• Saved Frequently showing as 400.000mhz

  #57 opened a year ago by Smithandjosh
  0

• Deleted

  #54 opened a year ago by ifuchs
  0

• Am reception bandwidth?

  #7 opened 2 years ago by ea3grn
  20

• Update on Markdown Documentation for 'k5_26_encrypted_18to1300MHz.md'

  #44 opened a year ago by wrcrooks
  1

• Cannot update firmware k5_26_encrypted_18to1300Mhz_500k_step on UV-K5

  #51 opened a year ago by YD9CKH
  1

• How to write name for frequency over 600 Mhz with POrtable Radio CPS?

  #50 opened a year ago by YD9CKH
  2

• NOAA Channel Audio receive bypass 1050Hz tone requirement

  #49 opened a year ago by RE3CON
  0

• squelch recalibration?

  #6 opened 2 years ago by Ruprych
  9

• Range outside 18 and1300?

  #36 opened a year ago by marusc1
  3

• Low power setting too high

  #38 opened a year ago by gringobenuk
  1

• Hello UV-K6 Firmware k5_v3.00.10 unable to update

  #40 opened a year ago by madd7277727
  17

• Upper max frequency should be limited to 629.99000 MHz. Remainig 840-850 is useless

  #9 opened 2 years ago by pawol
  11

• [Question] Harmonics on 6m Band

  #27 opened 2 years ago by MLGHerobrine
  4

• [Question / Suggestion] Is AM software or hardware encoded?

  #29 opened 2 years ago by MLGHerobrine
  2

• Transmitter audio.

  #32 opened 2 years ago by marusc1
  2

• Sepatate wide narrow setting for receiver and transmitter.

  #37 opened 2 years ago by marusc1
  0

• If I try and upload any of these, I am getting an error - "the length of the file is too much"

  #31 opened 2 years ago by e-m-m-a
  10

• CTCSS/DCS issue

  #35 opened 2 years ago by Mechanik-CZ
  2

• How to program frequencies that are off the radio scale?

  #30 opened 2 years ago by piosylant
  3

• Is there a way to remap the function keys to something else?

  #34 opened 2 years ago by Lion4K
  0

• Screan Backlight

  #17 opened 2 years ago by N9CFG
  2

• Turn off backlight when scanning ?

  #18 opened 2 years ago by F4FFD
  1

• [Suggestion] Select Frequency Scan Range

  #28 opened 2 years ago by MLGHerobrine
  0

• Expand frequency scan boundaries function FC [F] + [4]

  #21 opened 2 years ago by RE3CON
  2

• Smaller Step Size

  #20 opened 2 years ago by EdReardon
  7

• Hardware

  #22 opened 2 years ago by gabizro
  1

• For v26

  #8 opened 2 years ago by gabizro
  13

• [Question/Enhancement] Improving 6M Power Output

  #16 opened 2 years ago by MLGHerobrine
  3

• please also patch the version number

  #15 opened 2 years ago by sq5bpf
  1

• AM should not be possible above 136MHz

  #10 opened 2 years ago by pawol
  3

• AM should be possible below 76MHz and in range 108-136MHz only

  #11 opened 2 years ago by pawol
  2

• No reception above 630MHz

  #1 opened 2 years ago by ferdzo
  1