UedaTakeyuki/mh-z19

Issues

• Some unexpected Error

  #55 opened 3 months ago by EliasKramer
  4

• Serial Device Must Be Specified When Using Raspberry Pi 5

  #54 opened 5 months ago by ziyucao
  3

• Another `{}` output issue

  #52 opened 9 months ago by 2ZZ
  10

• Raspberry Pi 5 Support

  #53 opened 9 months ago by rewse
  6

• Still return {} after using pull-up resistor and change freq = 250 and enable_uart = 1

  #51 opened 9 months ago by EfraimManurung
  11

• Without root permission won't set

  #50 opened a year ago by cypridox
  3

• Question about enabling serial port

  #13 opened 5 years ago by joshuajon
  6

• sudo python -m mh_z19 alway returns {}

  #49 opened 2 years ago by test597
  7

• Output always empty array

  #44 opened 3 years ago by DeckardCain2014
  7

• No Data & Serial Port problems

  #48 opened 2 years ago by wh1t3chr1s
  5

• Typo in Wiki module documentation

  #47 opened 2 years ago by bceylon
  2

• mh-z19.setHumidity()?

  #46 opened 3 years ago by Proktologe
  2

• Wrong temperature and wrong co2 value

  #45 opened 3 years ago by to-roth
  4

• Character Encoding Issue When Installing on Windows

  #41 opened 3 years ago by electronsandstuff
  3

• Return co2 value as raw string

  #39 opened 3 years ago by jonesthefox
  0

• error: ubyte format requires 0 <= number <= 255

  #38 opened 3 years ago by kzehnter
  4

• after install pondslider : Error No module named _init__

  #37 opened 3 years ago by herk0
  8

• No module named mh_z19

  #36 opened 3 years ago by DavidBock
  3

• Timestamp is wrong when downloading data

  #34 opened 3 years ago by spidermancan
  3

• function abc_off() work fine but function read() not work

  #33 opened 3 years ago by temycor
  12

• "null" on screen.

  #32 opened 3 years ago by spidermancan
  2

• Raspberry 4 Support

  #29 opened 4 years ago by iperniaf
  12

• Funcion abc_off()

  #23 opened 4 years ago by temycor
  4

• untested zero point calibration command seems to be working as expected

  #27 opened 4 years ago by richteas75
  3

• sudo python -m mh_z19 alway returns null

  #28 opened 4 years ago by flipper31
  8

• Returns null - Need help

  #26 opened 4 years ago by OlafKocanda
  17

• Reported co2 level wrong

  #25 opened 4 years ago by rimeraz
  2

• Autostart 5 minute change to seconds?

  #24 opened 4 years ago by moessie
  0

• Not getting data

  #14 opened 5 years ago by KrunchMuffin
  11

• --serial_device not working

  #21 opened 4 years ago by idegre
  3

• Got no valid response

  #22 opened 4 years ago by monojk
  12

• Add additional value for detection range

  #19 opened 5 years ago by WO15
  3

• link to new datasheet of MH-Z19

  #18 opened 5 years ago by WO15
  3

• Usage in Python 3 without sudo

  #17 opened 5 years ago by ralphbe91
  7

• CO2 measurement from script

  #16 opened 5 years ago by Janusmartin
  3

• Use different serial port

  #12 opened 5 years ago by Actpohomoc
  6

• Typo in readme file about calibration

  #11 opened 5 years ago by WO15
  1

• Pip package should depend on setuptools and wheel

  #6 opened 6 years ago by sw
  3

• Add option to read temperature

  #5 opened 6 years ago by rzarajczyk
  4

• Using along python3

  #2 opened 6 years ago by VVIERV00
  2

• Additional functionality: Calibration, automatic baseline correction and tempterature

  #1 opened 6 years ago by DFyson
  2