actions-immortalwrt-mtk-sdk-phicomm-k2p

中文说明

供斐讯 K2P 使用、基于 GitHub Actions CI 的自动化 ImmortalWrt 构建，使用 padavanonly源码、Linux 5.10 内核，以及开启了 MTK SDK HWNAT 支持。

如何使用

Fork 本仓库，修改 seed.conf 配置文件，开启 Actions CI 进行构建。

或者，如果您是斐讯 K2P 用户，可直接从 Actions 或 release 中下载已编译好的固件。

刷机步骤和其他固件大致相同，如您在 K2P 上使用 breed，刷写时选择公版布局即可。

固件内容

基于 ImmortalWrt 18.06-k5.4

LuCI:
luci-app-arpbind
luci-app-ddns
luci-app-sqm
luci-app-ssr-plus
luci-app-turboacc
luci-app-udpxy
luci-app-upnp
luci-app-vlmcsd
luci-app-wireguard
luci-app-wol
luci-theme-atmaterial

非 LuCI 的其他系统组件：
xray-core 1.5.9
ipt2socks
cloudflare ddns
ipv6helper
htop
zram-swap

TCP BBR
Fullcone NAT
MTK SDK HWNAT
Linux 5.10

题外话

如您需要配置 udpxy / IPTV 转发，且光猫支持自行配置 VLAN，可参考图解ax6s利用openwrt进行iptv单线复用并转发至局域网进行配置。

关于为什么我又开始折腾 ImmortalWrt 了，是看到了 MTK SDK HWNAT 支持，并且实测性能在斐讯 K2P 上表现已经足够好，WAN PPPoE to WiFi ~650Mbps（CPU 占用 < 70%），WAN PPPoE to LAN 跑满（CPU 占用几乎为0）。加上 OpenWrt / ImmortalWrt 对插件和个性化支持远好于 Padavan，所以又折腾了起来。

非常感谢 MeIsReallyBa、padavanonly、天灵、Lean 等国内 OpenWrt 社区的大佬们，能给大家的 MT76 设备献上这份大礼，K2P 这个多年前的设备可以继续发挥余热了。

当然，也感谢 MTK ~~这个并不及时~~的开源。

README

Automated build of padavanonly/immortalwrt for Phicomm K2P, with Linux 5.10 and MTK SDK HWNAT enabled.

How to use

Fork this repository, modify seed.conf file by your demand, and enable GitHub Actions to compile the firmware.

Or if you're using Phicomm K2P, you may download the firmware directly from Actions or releases.

The flashing procedure is pretty much the same as other firmware, if you're using breed bootloader, choose "generic" flash layout should be okay.

Packages included

Based on ImmortalWrt 18.06-k5.4

LuCI:
luci-app-arpbind
luci-app-ddns
luci-app-sqm
luci-app-ssr-plus
luci-app-turboacc
luci-app-udpxy
luci-app-upnp
luci-app-vlmcsd
luci-app-wireguard
luci-app-wol
luci-theme-atmaterial

Other non-LuCI stuff:
xray-core 1.5.9
ipt2socks
cloudflare ddns
ipv6helper
htop
zram-swap

TCP BBR
Fullcone NAT
MTK SDK HWNAT
Linux 5.10

Performance results

WAN PPPoE to WiFI 5GHz: ~650Mbps with < 70% CPU utilization

WAN PPPoE to LAN: maxed out my bandwidth, with 0% (<1%) CPU utilization

原 Actions 仓库说明 / Info for the original Actions repository

English | 中文

Actions-OpenWrt

A template for building OpenWrt with GitHub Actions

Usage

Click the Use this template button to create a new repository.
Generate .config files using Lean's OpenWrt source code. ( You can change it through environment variables in the workflow file. )
Push .config file to the GitHub repository.
Select Build OpenWrt on the Actions page.
Click the Run workflow button.
When the build is complete, click the Artifacts button in the upper right corner of the Actions page to download the binaries.

Tips

It may take a long time to create a .config file and build the OpenWrt firmware. Thus, before create repository to build your own firmware, you may check out if others have already built it which meet your needs by simply search Actions-Openwrt in GitHub.
Add some meta info of your built firmware (such as firmware architecture and installed packages) to your repository introduction, this will save others' time.

VicePolice/actions-immortalwrt-mtk-sdk-phicomm-k2p