Wallacoloo/printipi

Issues

• CoreXY Supporting?

  #97 opened 6 years ago by Penta0308
  0

• I succeeded to be run printipi on rpi3,But I have got other problem.

  #96 opened 8 years ago by Mokutsuno
  4

• Cannot Connect To Printer Ussing octoPrint

  #92 opened 8 years ago by mohamedamineamdouni
  1

• extrideur, termistore and fan

  #93 opened 8 years ago by mohamedamineamdouni
  1

• disable termistore reading

  #94 opened 8 years ago by mohamedamineamdouni
  1

• Cannot run printipi in Raspberry pi 3

  #95 opened 8 years ago by Mokutsuno
  2

• [Raspberry Pi] Consider using the GPU for precise GPIO timings, rather than DMA

  #65 opened 10 years ago by Wallacoloo
  4

• raspberry pi 2 crashe after runing printipi

  #91 opened 9 years ago by mohamedamineamdouni
  12

• IoDriver for L298N ?

  #90 opened 9 years ago by hsh001
  1

• Consider per-axis acceleration scheme

  #87 opened 10 years ago by Wallacoloo
  0

• Arc planning only considers tangential acceleration

  #50 opened 10 years ago by Wallacoloo
  11

• AxisSteppers should not have to be initialized with their index

  #81 opened 10 years ago by Wallacoloo
  0

• AxisStepper refactoring

  #78 opened 10 years ago by Wallacoloo
  2

• Add support for returning comments in gcode responses

  #79 opened 10 years ago by Wallacoloo
  0

• Add a way to test IO in the automated testsuite

  #68 opened 10 years ago by Wallacoloo
  1

• MotionPlanner Schedules OutputEvents in the Wrong Order

  #64 opened 10 years ago by Wallacoloo
  0

• schedPwm should use EventClockT::duration for maxPeriod (and rename to idealPeriod)

  #67 opened 10 years ago by Wallacoloo
  0

• Allow specifying a fan index in M106 (and M107)

  #71 opened 10 years ago by Wallacoloo
  0

• Make an IoDrivers iterator to replace tupleCallOnAll & tupleCallOnIndex calls

  #75 opened 10 years ago by Wallacoloo
  1

• IoPin should have a `pwmWrite()` method

  #76 opened 10 years ago by Wallacoloo
  0

• Implement M119: Get Endstop Status

  #72 opened 10 years ago by Wallacoloo
  1

• Warn whenever two IoPins refer to the same physical pin

  #74 opened 10 years ago by Wallacoloo
  0

• Allow for differently shaped beds when clamping coordinates?

  #73 opened 10 years ago by Wallacoloo
  0

• [gparse] file descriptors aren't closed upon Com destruction

  #70 opened 10 years ago by Wallacoloo
  0

• [Raspberry Pi] DMA Optimization Thread

  #31 opened 10 years ago by Wallacoloo
  5

• Restructure Testsuites

  #66 opened 10 years ago by Wallacoloo
  1

• Add Servo Control

  #62 opened 10 years ago by Wallacoloo
  3

• Implement M115: Get Firmware Version

  #63 opened 10 years ago by Wallacoloo
  1

• Make AxisHomeStepper a routine, not a type

  #54 opened 10 years ago by Wallacoloo
  2

• Refactor IoPin interface

  #51 opened 10 years ago by Wallacoloo
  4

• Add test integration

  #61 opened 10 years ago by Wallacoloo
  2

• Employ a Documentation Generator

  #58 opened 10 years ago by Wallacoloo
  1

• Replace `GpioPinIdType OutputEvent::pinId()` with `IoPin OutputEvent::pin()`

  #60 opened 10 years ago by Wallacoloo
  1

• Remove Event class

  #57 opened 10 years ago by Wallacoloo
  3

• Research & Implement basic Thermal Runaway Protection

  #59 opened 10 years ago by Wallacoloo
  0

• Reorganize folders

  #53 opened 10 years ago by Wallacoloo
  0

• Reorganize declaration of AxisSteppers

  #55 opened 10 years ago by Wallacoloo
  0

• Move default HardwareScheduler into src/drivers/generic/hardwarescheduler.h

  #56 opened 10 years ago by Wallacoloo
  0

• Build fails with "internal compiler error" on gcc-4.7

  #52 opened 10 years ago by Wallacoloo
  2

• Make MACHINE build option case-insensitive

  #47 opened 10 years ago by Wallacoloo
  5

• Replace public typedefs in drv::Machine with public accessors

  #45 opened 10 years ago by Wallacoloo
  1

• Make drv::A4988::getEventOutputSequence output a 1 uS STEP pulse

  #46 opened 10 years ago by Wallacoloo
  1

• M109 does not wait until temperature is reached before returning

  #41 opened 10 years ago by Wallacoloo
  1

• Replace code in drivers/axisstepper.h with tools from tupleutil.h

  #44 opened 10 years ago by Wallacoloo
  0

• Revise platform-specific driver detection

  #39 opened 10 years ago by Wallacoloo
  2

• Remove IODriver::stepForward/stepBackward

  #42 opened 10 years ago by Wallacoloo
  1

• PID Issues

  #32 opened 10 years ago by matthewSorensen
  1

• Add a base directory for M32 command

  #37 opened 10 years ago by Wallacoloo
  1

• Reduce heater pwm frequency

  #38 opened 10 years ago by Wallacoloo
  4

• Move Event -> OutputEvent translation into the State (instead of the Scheduler)

  #33 opened 10 years ago by Wallacoloo
  1