WuMRC/drive

Issues

• There is a small mistake in AD5933.cpp, line 29

  #28 opened 3 years ago by wojiaodingsan
  0

• Can't read multiple byte data by block read function in arduino

  #27 opened 3 years ago by wojiaodingsan
  0

• AD5258 reads don't work

  #26 opened 6 years ago by dlchambers
  0

• connection diagram between ad5933 and arduino

  #25 opened 6 years ago by Monzurul-1
  0

• Z_LoggerComplex readings are off

  #24 opened 7 years ago by LKY21
  4

• Changing Voltage of Pulse (Range)

  #20 opened 9 years ago by itkwon
  5

• setVolPGA function has a slight error.

  #22 opened 9 years ago by tunjid
  2

• Calibration Issue

  #21 opened 10 years ago by tunjid
  5

• Errors in returning Real and Imaginary values

  #17 opened 10 years ago by tunjid
  23

• Incorporating TJ's new BLE code with AD5933

  #14 opened 10 years ago by itkwon
  9

• Calibration Phase

  #19 opened 10 years ago by JeanRintoul
  9

• The repository is very messy

  #18 opened 10 years ago by barrybelmont
  3

• Z_BLE_3_MEGA: Improvement of changeVal()

  #16 opened 10 years ago by itkwon
  4

• Downsides of software serial libraries

  #15 opened 10 years ago by tunjid
  11

• Z_Logger Conflict

  #12 opened 10 years ago
  3

• Question about the mechanism of changing acquisition rate.

  #13 opened 10 years ago by itkwon
  1

• Z_Logger: Erroneous Z Values

  #11 opened 10 years ago
  5

• Code hanging on getMagOnce()

  #10 opened 10 years ago
  7

• Library import errors on compilation

  #9 opened 10 years ago
  9

• setCtrMode() syntax

  #8 opened 10 years ago
  2

• perPixelTrack has no built in filter function

  #1 opened 10 years ago by barrybelmont
  1

• Gain factor inverted?

  #6 opened 10 years ago
  3

• Function for calculating needed settling time cycles?

  #5 opened 10 years ago
  5

• Data read by getMagOnce() and getMagValue()

  #7 opened 10 years ago
  1

• See Dan's Code to improve mine little bit.

  #3 opened 10 years ago by itkwon
  4

• Unit input for setStartFreq()?

  #4 opened 10 years ago
  1

• No net motion correct frame to frame

  #2 opened 10 years ago by barrybelmont
  0