/transbot

Transbot end-to-end learning

transbot

Transbot end-to-end learning

Remote Development

Here I will use VS Code for remote development.

  1. make sure the computer/phone and the Transbot are on the same network
  2. open a remote host in VS Code, and connect to Transbot by e.g., ssh jetson@192.168.0.20 -20, where jetson is the username of the Jetson Nano board, 192.168.0.20 is the IP address the robot might have (change to your own), 20 is the ssh port number.
  3. type password and that's it.