ZZ-Cat/CRSFforArduino
An Arduino Library for communicating with ExpressLRS and TBS Crossfire receivers.
C++AGPL-3.0
Pinned issues
Issues
- 2
Version 1.1.0 Development Tracking
#111 opened by ZZ-Cat - 0
MISRA compliance
#133 opened by ZZ-Cat - 3
Docs guidance on how to wiring up a receiver.
#125 opened by gruvin - 1
Add custom baud rate for CRSF protocol
#131 opened by krababonga - 9
- 0
- 5
Raspberry Pi Pico W
#109 opened by britannio - 9
Teensy 4.1 not working
#104 opened by christophers090 - 1
Read CRSF Telemetry Mirrored to Radio Aux Ports
#119 opened by matt-nolan11 - 5
- 0
Example CRSFforArduino example "rc_channels" not working, Library not installing correctly, no simple way to enter or change Rx/Tx pin numbers, not enough validation or testing before releasing.
#97 opened by SB-JHL-B26 - 0
Arduino IDE builds are broken
#93 opened by ZZ-Cat - 0
Re-factor UART pin assignments.
#70 opened by ZZ-Cat - 0
Process link statistics from incoming packets.
#73 opened by ZZ-Cat - 9
- 1
Version 1.0.0 Development Tracking
#61 opened by ZZ-Cat - 0
Refactor Compatibility Table
#67 opened by ZZ-Cat - 0
Add failsafe handling
#69 opened by ZZ-Cat - 6
Support for Raspberry Pico
#52 opened by PeterCasa - 1
- 1
Arduino Nano 33 IoT Not Compatible
#56 opened by Speshl - 0
- 1
- 2
Add Attitude/Artificial Horizon telemetry
#16 opened by ZZ-Cat - 0
Add Battery & Power Consumption telemetry
#17 opened by ZZ-Cat - 5
Teensy 3.x, 4.x
#36 opened by Kristabel28 - 3
- 0
Automatic UART baud-rate configuration
#74 opened by ZZ-Cat - 5
Seeed Studio XIAO nRF52840 compatibility
#62 opened by kingfisher09 - 3
Can I communicate and interact with TX?
#59 opened by zhuwei - 1
GPS telemetry
#15 opened by ZZ-Cat - 0
Passthrough over CRSF
#4 opened by ZZ-Cat - 1
PPM output
#24 opened by axljackass - 0
- 0
Bring back compatibility with the Arduino IDE
#9 opened by ZZ-Cat - 2
Strange behaviour
#12 opened by wizz92