/sv2v

SystemVerilog to Verilog conversion

Primary LanguageHaskellBSD 3-Clause "New" or "Revised" LicenseBSD-3-Clause

sv2v: SystemVerilog to Verilog

sv2v converts SystemVerilog (IEEE 1800-2017) to Verilog (IEEE 1364-2005), with an emphasis on supporting synthesizable language constructs.

The primary goal of this project is to create a completely free and open-source tool for converting SystemVerilog to Verilog. While methods for performing this conversion already exist, they generally either rely on commercial tools, or are limited in scope.

This project was originally developed to target Yosys, and so allows for disabling the conversion of (passing through) those SystemVerilog features which Yosys supports.

The idea for this project was shared with me while I was an undergraduate at Carnegie Mellon University as part of a joint Computer Science and Electrical and Computer Engineering research project on open hardware under Professors Ken Mai and Dave Eckhardt. I have greatly enjoyed collaborating with the team at CMU since January 2019, even after my graduation the following May.

Dependencies

All of sv2v's dependencies are free and open-source.

  • Build Dependencies
    • Haskell Stack - Haskell build system
    • Haskell dependencies are managed in sv2v.cabal
  • Test Dependencies
    • Icarus Verilog - for Verilog simulation
    • shUnit2 - test framework
    • Python (any version) - for generating certain test cases

Installation

Pre-built binaries

Binaries for Ubuntu, macOS, and Windows are available on the releases page. If your system is not covered, or you would like to build the latest commit, simple instructions for building from source are below.

Building from source

You must have Stack installed to build sv2v. Then you can:

git clone https://github.com/zachjs/sv2v.git
cd sv2v
make

This creates the executable at ./bin/sv2v. Stack takes care of installing exact (compatible) versions of the compiler and sv2v's build dependencies.

You can install the binary to your local bin path (typically ~/.local/bin) by running stack install, or copy over the executable manually.

Usage

sv2v takes in a list of files and prints the converted Verilog to stdout. Using --write=adjacent will create a converted .v for every .sv input file rather than printing to stdout. --write/-w can also be used to specify a path to a .v output file.

Users may specify include search paths, define macros during preprocessing, and exclude some of the conversions. Specifying - as an input file will read from stdin.

Below is the current usage printout. This interface is subject to change.

sv2v [OPTIONS] [FILES]

Preprocessing:
  -I --incdir=DIR           Add directory to include search path
  -D --define=NAME[=VALUE]  Define a macro for preprocessing
     --siloed               Lex input files separately, so macros from
                            earlier files are not defined in later files
     --skip-preprocessor    Disable preprocessor
Conversion:
     --pass-through         Dump input without converting
  -E --exclude=CONV         Exclude a particular conversion (Always, Assert,
                            Interface, Logic, or UnbasedUnsized)
  -v --verbose              Retain certain conversion artifacts
  -w --write=MODE/FILE      How to write output; default is 'stdout'; use
                            'adjacent' to create a .v file next to each input;
                            use a path ending in .v to write to a file
Other:
     --oversized-numbers    Disable standard-imposed 32-bit limit on unsized
                            number literals (e.g., 'h1_ffff_ffff, 4294967296)
     --dump-prefix=PATH     Create intermediate output files with the given
                            path prefix; used for internal debugging
     --help                 Display help message
     --version              Print version information
     --numeric-version      Print just the version number

Supported Features

sv2v supports most synthesizable SystemVerilog features. Current notable exceptions include defparam on interface instances, certain synthesizable usages of parameterized classes, and the bind keyword. Assertions are also supported, but are simply dropped during conversion.

If you find a bug or have a feature request, please create an issue. Preference will be given to issues which include examples or test cases.

SystemVerilog Front End

This project contains a preprocessor, lexer, and parser, and an abstract syntax tree representation for a subset of the SystemVerilog specification. The parser is not very strict. The AST allows for the representation of syntactically (and semantically) invalid Verilog. The goal is to be more general in the representation to enable more standardized and straightforward conversion procedures. This could be extended into an independent and more fully-featured front end if there is significant interest.

Testing

Once the test dependencies are installed, tests can be run with make test. GitHub Actions is used to automatically test commits.

There is also a SystemVerilog compliance suite being created to test open-source tools' SystemVerilog support. Although not every test in the suite is applicable, it has been a valuable asset in finding edge cases.

Acknowledgements

This project was originally forked from Tom Hawkin's Verilog parser. While the front end has changed substantially to support the larger SystemVerilog standard, his project was a great starting point.

Reid Long was invaluable in developing this tool, providing significant tests and advice, and isolating many bugs. His projects can be found here.

Edric Kusuma helped me with the ins and outs of SystemVerilog, with which I had no prior experience, and has also helped with test cases.

Since sv2v's public release, several people have taken the time to file detailed bug reports and feature requests. I greatly appreciate their help in furthering the project.