Slicer CIP extension not available using Slicer 4.11.0 on Mac OS.

Question

Slicer CIP extension not available using Slicer 4.11.0 on Mac OS.

mattwarkentin opened this issue 5 years ago · 5 comments

Is the Slicer CIP extension no longer being actively supported? I recently installed the nightly build version of Slicer (version 4.11.0) and the CIP extension is no longer available for installation. Any idea why?

Previously I had Slicer 4.8.1 and CIP extension worked fine.

I am on a Mac with Mojave 10.14.4.

Thanks for your help.

Answer 1 · 2019-05-17T18:05:06.000Z

Hi Matthew, SlicerCIP is not compatible with the nightly build of Slicer yet. You can download a prepackaged version of SlicerCIP from our website: https://chestimagingplatform.org/download I hope that helps, Jorge

On Thu, May 16, 2019 at 5:10 PM Matthew T. Warkentin < ***@***.***> wrote: Is the Slicer CIP extension no longer being actively supported? I recently installed the nightly build version of Slicer (version 4.11.0) and the CIP extension is no longer available for installation. Any idea why? Previously I had Slicer 4.8.1 and CIP extension worked fine. I am on a Mac with Mojave 10.14.4. Thanks for your help. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#25?email_source=notifications&email_token=ABEQ3KR2CB4AN4HCS3HZY4DPVXET3A5CNFSM4HNQGRC2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GUIUACQ>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABEQ3KUIBZKVR2YXNZWND63PVXET3ANCNFSM4HNQGRCQ> .

-- Jorge Onieva

Answer 2 · 2019-05-17T18:23:42.000Z

@jonieva Thanks for the update. Is the '3D Slicer with SlicerCIP integrated' download essentially Slicer 4.8.1 with the SlicerCIP extension pre-installed?

Answer 3 · 2019-05-17T19:05:06.000Z

Correct, that's pretty much it :-) Jorge Onieva

…

On Fri, May 17, 2019 at 2:23 PM Matthew T. Warkentin < ***@***.***> wrote: @jonieva <https://github.com/jonieva> Thanks for the update. Is the '3D Slicer with SlicerCIP integrated' download essentially Slicer 4.8.1 with the SlicerCIP extension pre-installed? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#25?email_source=notifications&email_token=ABEQ3KUHB67VHJAPLY2UD2LPV3Z27A5CNFSM4HNQGRC2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVVQDAA#issuecomment-493552000>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ABEQ3KVCMFRQEYA6J2PG5ILPV3Z27ANCNFSM4HNQGRCQ> .

Answer 4 · 2019-05-17T20:57:12.000Z

Hola Jorge, Gracias por contestar. Me tengo que poner las pilas con esto. Igual podemos dedicarle unos días post ATS. Cerrar release Cerrar paper Y hacer un upgrade de dependencias y de SlicerCIP /R

…

Sent from my iPhone

On May 17, 2019, at 3:36 PM, Matthew T. Warkentin ***@***.***> wrote: Closed #25. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

Answer 5 · 2019-08-07T15:13:53.000Z

Hi, just wondering if the Slicer CIP extension has been made available now on more recent Slicer builds? Thanks.