adafruit/ArduinoCore-samd

Issues

• SercomUartTxPad enum is specific to SAMD21, incorrect for SAMD51

  #368 opened 2 months ago by SRGDamia1
  1

• TRRS Trinkey 'variant.h' not found on Arduino Linux IDE

  #365 opened 5 months ago by istnv
  0

• SPI on Adafruit Metro M0 Express

  #357 opened 7 months ago by nerdyscout
  0

• SAMD51(J19) revision F DMA issues with 2 identical TCCx trigger source

  #356 opened 8 months ago by flety-emmanuel
  1

• Feather M4 Express no PWM out on RX (0) or TX (1)

  #349 opened a year ago by caternuson
  1

• Bug in USBDeviceClass.sendStringDecscriptor/sendDescriptor may send malformed descriptors.

  #350 opened a year ago by alphaleonis
  2

• Arduino IDE 2 Debugger Not Available for Feather M0 or Feather M0 Express

  #345 opened a year ago by mjs513
  10

• UART SERCOM ref clock seems to be Main 120MHz, not SERCOM_FREQ_REF = 48MHz

  #341 opened 2 years ago by SimonMerrett
  1

• analogRead() freezing on several Trinkey boards

  #343 opened 2 years ago by caternuson
  0

• SAMD21 Overclock

  #340 opened 2 years ago by dojyorin
  0

• Reading Analog Inputs with 12-bit resolution not working on SAMD51

  #342 opened 2 years ago by DevonReynolds
  0

• Actual SPI speed can be higher than maxSpeed requested in SPISettings

  #334 opened 2 years ago by greiman
  1

• Grand Central M4: SPI speed not set using transactions

  #336 opened 2 years ago by fvzeppelin
  1

• SPI DMA write-only transfer(txBuf, nullptr, count) corrupts following receives.

  #335 opened 2 years ago by greiman
  0

• Unable to build MetroM4 Bootloader: "error: 'PORT' undeclared"

  #332 opened 2 years ago by ricardoboss
  3

• Arduino PWM pin conflicts on SAMD21

  #329 opened 2 years ago by kattni
  3

• `adafruit:samd:adafruit_feather_m4` Cannot use `--build-property build.extra_flags` property with Arduino CLI

  #330 opened 3 years ago by zfields
  5

• QTPy_M0 variant has LED_BUILTIN but there is none

  #327 opened 3 years ago by jerryneedell
  2

• Arduino Board Manager: "Warning: non trusted contribution"

  #294 opened 4 years ago by timonsku
  2

• Update the TinyUSB library?

  #322 opened 3 years ago by Spegs21
  2

• Add defines for internal DotStar pins

  #320 opened 3 years ago by caternuson
  4

• Built-in neopixel on QT Py M0 (and probably feather M4 CAN) shows incorrect colors

  #311 opened 3 years ago by WestfW
  6

• Increase SAMD21 maximum ADC impedance?

  #302 opened 3 years ago by adamgarbo
  4

• how to detect adafruit boards at compile time?

  #305 opened 3 years ago by 2bndy5
  4

• analogWrite on Atmel SAMD behaves differently than described by official Arduino documentation

  #304 opened 3 years ago by pauljurczak
  3

• Receiving USART in SLEEPMODE = STANDBY

  #293 opened 4 years ago by FordJ
  0

• Compilation error with Feather M4 CAN: `CANSAME5x.cpp:12:10: fatal error: same51.h: No such file or directory`

  #297 opened 4 years ago by gromain
  7

• Use of undefined behavior

  #287 opened 4 years ago by henrygab
  5

• Don't use strncpy() in String::remove()

  #295 opened 4 years ago by bmcdonnell
  1

• Update of Arduino Servo library for SAMD21 and SAMD51

  #292 opened 4 years ago by agrommek
  4

• Build warnings -- [-Wrestrict]

  #253 opened 4 years ago by henrygab
  2

• Grand Central M4 MOSI and SCLK Pins Swapped

  #284 opened 4 years ago by Rymar-Eng
  0

• SERCOM::initSPI() Prevents Hardware Control of SPI SS Signal by Clearing SERCOM_SPI_CTRLB_MSSEN

  #283 opened 4 years ago by Rymar-Eng
  3

• Feather M0 Proto not working with AirLift Featherwing

  #282 opened 4 years ago by DrNebin
  2

• Bug: Internal Compiler Error

  #271 opened 4 years ago by arock093
  3

• Bug: write-only SPI.cpp DMA transfers are not working

  #280 opened 4 years ago by RudolphRiedel
  0

• Access to old releases

  #273 opened 4 years ago by timonsku
  4

• Analog Read Issue

  #272 opened 4 years ago by Daniel314159
  2

• PINS_COUNT is useless and inconsistent.

  #268 opened 4 years ago by WestfW
  4

• Missing Grand Central M4 bootloader .bin file

  #266 opened 4 years ago by dcelectr
  6

• GrandCentral M4 attachInterrupt pin D10 turns off interrupts for pin A14

  #261 opened 4 years ago by greymfm
  2

• Build warnings -- cleanup fallthrough warnings

  #248 opened 4 years ago by henrygab
  4

• variant.cpp Feather M4 points to PA27 for USB DP (D+) pin

  #260 opened 4 years ago by wa1tnr
  1

• Tone() not working on SAMD51

  #255 opened 4 years ago by RAyWB
  9

• Build warnings -- [-Wmaybe-uninitialized]

  #250 opened 4 years ago by henrygab
  0

• Build warnings -- [-Wunused-but-set-variable]

  #249 opened 4 years ago by henrygab
  0

• Build warnings -- [-Wuninitialized]

  #251 opened 4 years ago by henrygab
  0

• Build warnings -- [-Wignored-qualifiers]

  #252 opened 4 years ago by henrygab
  0

• analogWriteResolution() issues

  #256 opened 4 years ago by mzero
  2

• SAMD21 still using the analogRead with the ADC bug (not waiting for the first convertion to finish) :(

  #254 opened 4 years ago by ricardodeazambuja
  0