airgradienthq/arduino

Issues

• firmware versions and relevant boards

  #180 opened 5 months ago by Tom-Neverwinter
  2

• Add combo LED modus

  #262 opened 20 days ago by domoritz
  0

• I-9PSL firmware 3.1.4 doesn't recognize SHT3X

  #203 opened 4 months ago by pjcreath
  6

• [docs] instructions to compile

  #160 opened 6 months ago by hestiahacker
  24

• Inform AG server of configuration source setting

  #216 opened 3 months ago by airgradienthq
  4

• Display no longer turns off at night

  #250 opened 2 months ago by yesezra
  2

• Seperate Error Messages for AG Server N/A & Add to Dashboard

  #248 opened 2 months ago by airgradienthq
  3

• BootCount not updated when posting to AirGradient is disabled

  #253 opened 2 months ago by dtrejod
  1

• Increase RH in API to two decimal points

  #254 opened 2 months ago by airgradienthq
  0

• Home Assistant Integration - stuck on already_in_progress if AirGradient is initially inaccessible

  #183 opened 2 months ago by asheroto
  4

• Open Air O-1PST logs showing various errors

  #147 opened 2 months ago by MallocArray
  4

• I-9PSL displays dash/hyphen for PM2.5 intermittently when air quality is good

  #202 opened 2 months ago by hsugene
  4

• LED inconsistency | Firmware v. 3.1.1

  #161 opened 2 months ago by yegormk
  6

• Prevent "postDataToAirGradient": null

  #220 opened 2 months ago by airgradienthq
  1

• Allow Switching Display of AirGradient ONE to Compensated / Non Compensated Values

  #240 opened 2 months ago by airgradienthq
  1

• PM compensation receiving temperature instead of RH

  #234 opened 2 months ago by GuilhermeZimeo
  1

• Data average before sending to the server

  #227 opened 3 months ago by GuilhermeZimeo
  1

• Ignore parameter values out of range

  #190 opened 3 months ago by airgradienthq
  11

• Update AQI Breakpoints

  #207 opened 4 months ago by MallocArray
  2

• Check Display I-9PSL uses PM Compensated Values

  #221 opened 3 months ago by airgradienthq
  0

• Check Compensation Formula

  #225 opened 3 months ago by airgradienthq
  1

• Relative Humidity compensated wrong

  #218 opened 3 months ago by airgradienthq
  0

• Reset board on repeated read errors from PMS sensor

  #217 opened 3 months ago by airgradienthq
  0

• Use HTPPS Endpoints

  #194 opened 5 months ago by airgradienthq
  1

• DIY Pro v3.3 kit screen rotation problem

  #211 opened 4 months ago by Mavrrick
  1

• Timeout handling

  #192 opened 5 months ago by airgradienthq
  5

• Configuration always save configure on power up

  #179 opened 4 months ago by pnt325
  0

• PM2.5 display could be wider

  #140 opened 4 months ago by MallocArray
  2

• Error message "firmware update fail, will retry"

  #199 opened 5 months ago by airgradienthq
  1

• Display went dark and LED at low brightness

  #141 opened 5 months ago by MallocArray
  2

• MQTT over TLS fails with "esp-tls-mbedtls: No server verification option..."

  #193 opened 5 months ago by kpe
  0

• [build documentation] Sketch name appears to be incorrect

  #159 opened 5 months ago by hestiahacker
  1

• Low temperature reading from PMS5003T

  #178 opened 5 months ago by airgradienthq
  2

• Boot counter not working in Dashboard

  #145 opened 5 months ago by MallocArray
  2

• Update ignored due to local unofficial changes

  #142 opened 5 months ago by MallocArray
  5

• Interest in Github Action for Arduino Compile?

  #181 opened 5 months ago by MallocArray
  1

• [blog] White text on white background

  #158 opened 5 months ago by hestiahacker
  1

• AirGradient ONE (indoor) disassociating from wifi during network outage

  #151 opened 5 months ago by groner
  4

• PCB 4.3: Boot loop if not connected to Dashboard

  #186 opened 5 months ago by airgradienthq
  1

• Rename Example File DiyIndoorProV3_7

  #189 opened 5 months ago by airgradienthq
  2

• Firmware 3.1.3 WiFi not reconnecting on power failure

  #187 opened 5 months ago by airgradienthq
  1

• PCB 4.3: Missing raw values for tvocRaw and noxRaw

  #184 opened 5 months ago by airgradienthq
  0

• PCB 4.3: Wrong model name

  #185 opened 5 months ago by airgradienthq
  3

• PCB 3.3 sometimes not recognizing SHT

  #188 opened 5 months ago by MallocArray
  2

• Implement Correction Formula for PM2.5 on Display

  #182 opened 5 months ago by airgradienthq
  0

• Unable to change configurationControl

  #174 opened 6 months ago by joostlek
  6

• Add boot to keep HA integration compatability

  #168 opened 6 months ago by airgradienthq
  1

• 'pmStandard' value 'usaqi' invalid

  #157 opened 6 months ago by joostlek
  1

• Add support for Prometheus/OpenMetrics to One V9 #59 no longer supported

  #153 opened 6 months ago by Kaydron1000
  2

• CO2 Calibration confusing in Dashboard

  #146 opened 6 months ago by MallocArray
  0