Issues
- 5
- 0
SVPWM problem
#158 opened by sunyanmeng963 - 0
Feature Request: add S-bus and F.BUS support for control and telemetry
#155 opened by EmanuelStassar - 0
Is the sine drive of AM32 SPWM or SVPWM?
#152 opened by sunyanmeng963 - 0
Setting Running Brake Level to 1 disables ESC
#150 opened by tyllurius - 2
[Request] Hardware Reference Design
#104 opened by bennymeg - 1
SKYSTARS_AM60_THRUSTER_F421
#146 opened by YetiSPb - 1
setting beep volume to zero disables esc
#145 opened by aerialhedgehog - 0
porting to TMOTOR P60A V2 4IN1 ESC
#139 opened by tiralonghipol - 1
iFlight Blitz E80
#133 opened by marcinczeczko - 1
Sending Dshot value 48 results in motor spinning, expected motor to stop
#125 opened by frank26080115 - 1
- 15
Add S.Port / FBus
#23 opened by jasc76 - 1
Feature request: active break
#99 opened by robustini - 6
VTOL motor positioning on stop
#11 opened by okiaba - 0
Request to delete the AM32_FLYROTOR_150A_F421 target
#107 opened by Jiki-Mo - 0
expand devinfo to have full eeprom
#103 opened by tridge - 0
convert to SYSTICK
#102 opened by tridge - 0
- 2
Bootloader for AT32F421 MCU
#98 opened by RealTheKad - 0
robustness checks
#80 opened by tridge - 0
Feature request -beacon delay -audible beacon with user adjustable strength and delay
#85 opened by pitts-mo - 3
Release assets .hex flashing question
#10 opened by bisak - 3
Is there any link to bootloader?
#62 opened by lida2003 - 2
- 1
proposal for bootloader changes
#47 opened by tridge - 14
iFlight G071 E55 4in1 64k bootloader
#52 opened by xagos - 0
adjusted_input are different from bi_direction-dshot and bi_direction-pwm, any idea?
#71 opened by lida2003 - 0
Motor diagnostic on startup
#70 opened by piotr-defendeye - 2
- 5
How to use WS2812 for at32 mcu's.
#64 opened by smollion1 - 2
DSHOT 2400 Support ?
#63 opened by devararendy - 0
What kind of situation will use second set of parameters from eeprom_address(0x0800F800), not default EEPROM_START_ADD(0x08007C00)?
#55 opened by lida2003 - 5
- 3
- 6
Standardization of the AM32 compiler version and compiler flags across Keil, Windows CLI & Linux CLI
#45 opened by ianrmurphy - 3
skystars am60 (MVP60) wrong current in telemetry
#40 opened by Stricted - 1
Typhoon32 no serial telemetry
#38 opened by xagos - 2
Hardware manufacturer's firmware release proposal
#32 opened by BAYCKRC - 0
beep strength
#26 opened by TianpeiLee - 5
- 0
- 2
Consultation on Integrating AM32 Firmware
#15 opened by AriescChyuan - 4
STM32G031 support
#20 opened by zyura - 2
EDT support?
#19 opened by fschuindt - 1
- 1
Voltage, current and temperature calibration
#14 opened by ss8688