amzn/zeek-plugin-bacnet

Issues

• Can not output data when there are multiple data (Read Property Multiple)

  #32 opened 2 years ago by takuma0121
  0

• Data is empty (COV Notification)

  #31 opened 2 years ago by takuma0121
  0

• already defined (Bacnet::log_bacnet)

  #6 opened 4 years ago by joelperez98
  10

• Error loading the plugin

  #28 opened 4 years ago by Cyb3r4rch3r
  1

• vendor proprietary Network Layer Message if network_layer_message_type in the range X'80' - X'FF'

  #25 opened 4 years ago by duffy-ocraven
  1

• weird things at Network Layer

  #27 opened 4 years ago by duffy-ocraven
  0

• the URLs in README.md don't work when the README is on packages.zeek.org/packages/view

  #7 opened 4 years ago by duffy-ocraven
  6

• NPCI bit-combination 0x2C should be supported

  #26 opened 4 years ago by duffy-ocraven
  0

• handling of optional content octets that follow the NPCI control octet

  #24 opened 4 years ago by duffy-ocraven
  0

• when negative-ack is TRUE, representing BACnet-SegmentACK-PDU would be usefully diagnostic

  #15 opened 4 years ago by duffy-ocraven
  3

• .%02d is the appropriate way to express hundredths of seconds

  #16 opened 4 years ago by duffy-ocraven
  2

• incorrect error enum strings, [57] = "Invalid Tag" , [58] = "Network Down"

  #23 opened 4 years ago by duffy-ocraven
  1

• Reject-Message-To-Network as 'Rorschach'

  #20 opened 4 years ago by duffy-ocraven
  1

• Initialize-Router-Table message X'06' and Initialize-Router-Table-Ack message X'07'

  #22 opened 4 years ago by duffy-ocraven
  1

• Establish-Connection-To-Network message X'08' and Disconnect-Connection-To-Network message X'09'

  #21 opened 4 years ago by duffy-ocraven
  0

• new unconfirmedServiceChoices who-Am-I (13), you-Are (14)

  #19 opened 4 years ago by duffy-ocraven
  0

• six Network Layer messages should be implemented

  #12 opened 4 years ago by duffy-ocraven
  8

• Network Layer Message Types X'12': What-Is-Network-Number and X'13': Network-Number-Is

  #18 opened 4 years ago by duffy-ocraven
  4

• SNAP frame of BACnet/MSTP shows up in weird.log

  #11 opened 4 years ago by duffy-ocraven
  3

• BVLC Layer 6 thru 8 messages should be implemented

  #8 opened 4 years ago by duffy-ocraven
  6

• BACnet-Reject-PDU and BACnet-Abort-PDU to be supported

  #14 opened 4 years ago by duffy-ocraven
  1

• Reject-Message-To-Network single octet as uint8, then the network number parameters as uint16

  #13 opened 4 years ago by duffy-ocraven
  1

• enumerated treatment beyond case 2: action, 25: limit enable, 107: segmentation support, 112: system status

  #17 opened 4 years ago by duffy-ocraven
  7

• BACnet with that capitalization is industry standard

  #9 opened 4 years ago by duffy-ocraven
  5

• unsupported byte length for bytestring_to_count

  #2 opened 5 years ago by voteblake
  14

• Add Vendor to Output

  #4 opened 5 years ago by humantargetjoe
  2

• BACnet-Error-PDU treats content as an object-type and a property-identifier

  #10 opened 4 years ago by duffy-ocraven
  4

• Identifier or enumerator value in enumerated type definition already exists

  #5 opened 4 years ago by hxnoyd
  3