ashtuchkin/vive-diy-position-sensor
Code & schematics for position tracking sensor using HTC Vive's Lighthouse system and a Teensy board.
C++MIT
Issues
- 0
Can it work on Lighthouse 2.0?
#85 opened by suliri - 0
using multiple diodes with a distance
#84 opened by miri999 - 1
Interpolation during lighthouse outage
#83 opened by WillNilges - 9
How to use tycmd in windows ?
#82 opened by luoxz-ai - 8
- 7
Receiving sensor position data
#50 opened by HiruniNuwanthika - 2
Using 2 sensors?
#81 opened by EdwardDeaver - 5
Increase precision
#74 opened by toncho11 - 5
TS4231 Does it support?
#79 opened by luoxz-ai - 4
Support for HTC Lighthouses 2.0
#52 opened by Mofeywalker - 1
Not understanding how to setup software part.
#37 opened by timfrans - 3
- 11
Length of sensed sync pulses gets longer the closer you get to the Lighthouse.
#34 opened by solinvictus21 - 2
Blinking Orange Light
#33 opened by DanielArnett - 13
How to use Photon firmware ?
#65 opened by orgicus - 4
Guide for a complete newbie
#75 opened by IMKIERA - 1
Valve Index base station 2.0?
#76 opened by carbonadam - 1
Compatability with other microprocessors?
#77 opened by LittleNyanCat - 11
Cannot get sync state
#73 opened by tech0x - 3
output data
#71 opened by amralabsi - 1
Question about OpenVR
#72 opened by emo10001 - 5
hello,thanks for the sharing. And if i want to use this 3d position data(Mavlink ATT_POS_MOCAP via serial), how to config parameters of PX4?
#63 opened by ajiangdaye - 3
Sensor Power Consumption
#47 opened by robnewton - 7
Circuit layout
#40 opened by bridger35 - 2
- 2
Working for Teensy 3.6
#42 opened by mattgil23 - 1
Is ESP8266 a good idea?
#43 opened by modulab - 1
Getting global position of sensor?
#45 opened by jackg0 - 1
Integrating to custom project
#49 opened by maker-ja - 3
Steamvr compatibility.
#51 opened by Lightsteed - 5
File to run for configurations
#53 opened by HiruniNuwanthika - 3
Error compiling for a Photon board
#56 opened by shwetankshrey - 2
- 2
Issue with the setup; Teensy doesn't work.
#57 opened by Aaryan90 - 12
- 1
Reading inputs from unity
#59 opened by glupeksha - 1
How to get the output data?
#69 opened by toncho11 - 1
Gerber file for the PCB
#67 opened by toncho11 - 1
confused about normal verctor described by 'Position calculation in detail'
#60 opened by poaongithub - 1
- 0
tyc monitor displaying values as 0000000 only not giving coordinates values
#61 opened by rajattyagi134 - 4
Error: reinterpret_cast from integer to pointer
#66 opened by toncho11 - 0
Schematic for the breadboard
#68 opened by toncho11 - 1
how to embedded imu with this project? any small suggestion will be helpful
#64 opened by jayaramanrp - 5
- 6
Problem with the Particle Photon platform
#44 opened by Wyldix - 3
Start of second syncpulse is off(~17ms).
#46 opened by koen1993 - 0
Monitoring the Teensy output using tycmd monitor
#48 opened by Aaryan90 - 0
Multiple Sensor Inputs // Switching to FTM sensor
#38 opened by shigazy - 1
TeensyLC compatibility?
#35 opened by SkaveRat