atc1441/CH559sdccUSBHost

Issues

• [Question] Can I use this project to restore UART signals that have been converted by CH340?

  #21 opened a year ago by liu2-3zhi
  1

• problem with full-speed USB device

  #17 opened 3 years ago by tomtobback
  1

• Rebuilding and reloading the firmware

  #20 opened 2 years ago by dbetz
  5

• Bluetooth mouse

  #4 opened 2 years ago by modi12jin
  3

• Can ESP32 S2 replace CH559?

  #14 opened 2 years ago by modi12jin
  2

• USB protocol to PS/2 protocol

  #16 opened 3 years ago by somhi
  2

• Not forwarding the first packet received after host initializes the device

  #12 opened 4 years ago by reardomi77
  1

• I want to move the pin to enter the bootloader to P2.5

  #13 opened 4 years ago by cas70240
  1

• Unable to perform a Full Duplex operation

  #19 opened 3 years ago by artiwiztechnologies
  0

• Support USB Memory Stick

  #18 opened 3 years ago by zafersn
  0

• Ram corruption

  #15 opened 3 years ago by fabiodl
  1

• Support USB-to-serial adapters

  #9 opened 4 years ago by probonopd
  7

• Sample Arduino code Port number is wrong for msgType MSG_TYPE_HID_INFO and MSG_TYPE_DEVICE_POLL

  #11 opened 4 years ago by alijani1
  1

• Many Ganmepads dont get recognized. USB device descriptor is sent, but HID descriptor is not sent.

  #10 opened 4 years ago by alijani1
  0

• HID Keyboard - key codes with incorrectly set high bit (0x80)

  #6 opened 4 years ago by dmcnaugh
  2

• HID keyboards don't set their own LEDs

  #7 opened 4 years ago by dmcnaugh
  1

• Support for USB Thermal Printer

  #8 opened 4 years ago by vishwakarma-anshu
  0

• Porting to CH554G

  #5 opened 4 years ago by dmcnaugh
  4

• Makefile for Linux

  #2 opened 5 years ago by maikmerten
  9

• pinMode function and ports use in general

  #3 opened 5 years ago by hexeguitar
  1

• English docs for CH559

  #1 opened 5 years ago by kprasadvnsi
  1