Bacterial assembly and annotation workflow

Assembly, variant calling, and annotation of bacterial genomes.

Introduction

This workflow is primarily used to assemble genomes from bacterial reads and provide information on features of interest within those assemblies through annotations.

The workflow can provide additional information about the assembly, such as antimicrobial resistance (AMR) analysis and sequence typing through an optional --isolates mode.

In brief, this workflow will perform the following:

De novo (or reference-based) assembly of bacterial genomes
Annotation of regions of interest within the assembly
Species identification and sequence typing (--isolates mode only)
Identify genes and SNVs associated with AMR (--isolates mode only)

Compute requirements

Recommended requirements:

CPUs = 16
Memory = 32GB

Minimum requirements:

CPUs = 4
Memory = 8GB

Approximate run time: 20-40 minutes per sample with ~50x coverage using minimum requirements

ARM processor support: True

Install and run

These are instructions to install and run the workflow on command line. You can also access the workflow via the EPI2ME application.

The workflow uses Nextflow to manage compute and software resources, therefore nextflow will need to be installed before attempting to run the workflow.

The workflow can currently be run using either Docker or Singularity to provide isolation of the required software. Both methods are automated out-of-the-box provided either docker or singularity is installed. This is controlled by the -profile parameter as exemplified below.

It is not required to clone or download the git repository in order to run the workflow. More information on running EPI2ME workflows can be found on our website.

The following command can be used to obtain the workflow. This will pull the repository in to the assets folder of nextflow and provide a list of all parameters available for the workflow as well as an example command:

nextflow run epi2me-labs/wf-bacterial-genomes –-help

A demo dataset is provided for testing of the workflow. It can be downloaded using:

wget https://ont-exd-int-s3-euwst1-epi2me-labs.s3.amazonaws.com/wf-bacterial-genomes/wf-bacterial-genomes-demo.tar.gz
tar -xzvf wf-bacterial-genomes-demo.tar.gz

The workflow can be run with the demo data using:

nextflow run epi2me-labs/wf-bacterial-genomes \
    --fastq wf-bacterial-genomes-demo/isolates_fastq \
    --isolates \
    --reference_based_assembly \
    --reference wf-bacterial-genomes-demo/ref/ref.fasta.gz \
    --sample_sheet wf-bacterial-genomes-demo/isolates_sample_sheet.csv
    --profile standard

For further information about running a workflow on the cmd line see https://labs.epi2me.io/wfquickstart/

Related protocols

This workflow is designed to take input sequences that have been produced from Oxford Nanopore Technologies devices.

Optimal DNA extraction will be dependent on the gram status of the organism. Some useful protocols are provided below:

Find more related protocols in the Nanopore community.

Inputs

Input Options

Nextflow parameter name	Type	Description	Help	Default
fastq	string	FASTQ files to use in the analysis.	This accepts one of three cases: (i) the path to a single FASTQ file; (ii) the path to a top-level directory containing FASTQ files; (iii) the path to a directory containing one level of sub-directories which in turn contain FASTQ files. In the first and second case, a sample name can be supplied with `--sample`. In the last case, the data is assumed to be multiplexed with the names of the sub-directories as barcodes. In this case, a sample sheet can be provided with `--sample_sheet`.
reference_based_assembly	boolean	Enable reference guided assembly instead of de-novo assembly.	By default de-novo assembly will be performed with Flye. Enable this to instead perform a reference-based consensus. A reference must be provided.	False
reference	string	Reference sequence FASTA file.	The reference sequence is used when performing reference-based assembly.
basecaller_cfg	string	Name of the model that was used to basecall signal data, used to select an appropriate Medaka model.	The basecaller configuration is used to automatically select the appropriate Medaka model. The automatic selection can be overridden with the `medaka_variant_model` and `medaka_consensus_model` parameters. The model list only shows models that are compatible with this workflow.	dna_r10.4.1_e8.2_400bps_sup@v4.2.0
analyse_unclassified	boolean	Analyse unclassified reads from input directory. By default the workflow will not process reads in the unclassified directory.	If selected and if the input is a multiplex directory the workflow will also process the unclassified directory.	False

Sample Options

Nextflow parameter name	Type	Description	Help	Default
sample_sheet	string	A CSV file used to map barcodes to sample aliases. The sample sheet can be provided when the input data is a directory containing sub-directories with FASTQ files.	The sample sheet is a CSV file with, minimally, columns named `barcode` and `alias`. Extra columns are allowed. A `type` column is required for certain workflows and should have the following values; `test_sample`, `positive_control`, `negative_control`, `no_template_control`.
sample	string	A single sample name for non-multiplexed data. Permissible if passing a single .fastq(.gz) file or directory of .fastq(.gz) files.

Isolate options

Nextflow parameter name	Type	Description	Help	Default
isolates	boolean	Run the Isolates pipeline on the assembly results if set to True.	Isolates mode adds further analysis options to the workflow such as multi-locus sequence typing and antimicrobial resistance calling, as well as producing single reports for each sample in the run.	False
resfinder_version	string	ResFinder version to use.	ResFinder is the tool used to check for antimicrobial resistance genes in isolates of bacteria.	4.3.2
resfinder_threshold	string	Threshold of required identity to report a match between a gene in the ResFinder database and the assembly. Valid interval: 0.00-1.00	Identity refers to the ratio of base pairs that match between the sequence in your assembly and that of the sequence in the ResFinder database. Increasing the threshold will results in fewer, but more accurate hits against the database.	0.8
resfinder_coverage	string	Minimum coverage (breadth-of) threshold required to report a match between a gene in the ResFinder database and the assembly. Valid interval: 0.00-1.00	The amount of an AMR gene that has to be present within the assembly as compared to the reference in the ResFinder database.	0.6
mlst_version	string	MLST version to use.		2.23.0

Advanced Options

Nextflow parameter name	Type	Description	Help	Default
run_prokka	boolean	Run prokka on consensus sequence	Will provide an output file with a list of annotations for your sequence. Optional because it can take some time.	True
prokka_opts	string	Command-line arguments for prokka	Command line arguments which can be used to alter prokka output annotation files.
flye_opts	string	Command-line arguments for flye	Command line arguments which can be used to alter the de-novo assembly process.
medaka_consensus_model	string	The name of a Medaka consensus model to use. This name will override the model automatically chosen based on the provided basecaller configuration.	The workflow will attempt to map the basecalling model used to a suitable Medaka consensus model. You can override this by providing a model with this option instead.
medaka_variant_model	string	The name of a Medaka variant model to use. This name will override the model automatically chosen based on the provided basecaller configuration.	The workflow will attempt to map the basecalling model used to a suitable Medaka variant model. You can override this by providing a model with this option instead.

Miscellaneous Options

Nextflow parameter name	Type	Description	Help	Default
threads	integer	Number of CPU threads.	Provided to alignment, flye assembly and prokka steps to improve performance.	3
disable_ping	boolean	Enable to prevent sending a workflow ping.		False

Outputs

Outputs files may be aggregated including information for all samples or provided per sample. Per-sample files will be prefixed with respective aliases and represented below as {{ alias }}.

Title	File path	Description	Per sample or aggregated
Workflow report	./wf-bacterial-genomes-report.html	Report for all samples	aggregated
Draft assembly FASTA file	./{{ alias }}.medaka.fasta.gz	Consensus file generated from either de-novo assembly or reference variant calling pipeline.	per-sample
Variants VCF file	./{{ alias }}.medaka.vcf.gz	VCF file of variants detected against the provided reference (Reference mode only).	per-sample
Variants summary	./{{ alias }}.variants.stats	TSV file of summary statistics for variants in sample (Reference mode only).	per-sample
Annotations files	./{{ alias }}.prokka.{gbk,gff}	Annotations of regions of interest in assembly in GBK and GFF format.	per-sample
Sequence typing results	./{{ alias }}.mlst.json	Sequence typing results in JSON format (isolates mode only).	per-sample
AMR calling results	./{{ alias }}_resfinder_results	Resfinder results for AMR calling (isolates mode only).	per-sample
isolates per sample report	/{{ alias }}-isolates-report.html	Per sample report isolates mode	per-sample

Pipeline overview

1. Concatenates input files and generate per read stats.

The fastcat/bamstats tool is used to concatenate multifile samples to be processed by the workflow. It will also output per read stats including average read lengths and qualities.

2a. De-novo assembly

i. Assembly

Flye is used to create a draft assembly from the FASTQ reads. This will run by default on the --nano-raw paramter for flye. Additional configuration can be performed using --flye_opts parameter.

ii. Polishing

The draft assembly from flye is then polished using Medaka. This step will attempt to correct any errors that were introduced during the de-novo assembly process.

The workflow selects the appropriate Medaka models based on the basecaller configuration that was used to process the signal data. You can use the parameter --basecaller_cfg to provide this information (e.g. dna_r10.4.1_e8.2_400bps_hac). Alternatively, you can choose the Medaka model directly with --medaka_consensus_model.

2b. Variant calling mode

i. Align reads

Reads are aligned against the provided reference with mini_align.

ii. Call variants

After alignment, haploid variants are called with Medaka.

iii. Use the variants to generate a consensus

The variants passing the depth filter are then incorporated in the reference to create the consensus sequence. Variant stats are also created at this point.

3. Annotations

Regions of interest within your assembly are identified and annotated using Prokka. By default, prokka will run with it's default databases, but users can refine the annotation using the --prokka_opts command. NOTE The workflow does not current accept any additional files sent to prokka such as GBK or GFF files.

4. Isolates mode (optional)

i. Multi-locus sequence typing (MLST)

MLST is a common technique used to help characterise your bacterial isolate, by using allelic variation from internal DNA fragments of 6-7 house keeping genes. Typing schemes for specific species and genera are found on PubMLST and are pre-loaded into this workflow. MLST will try to infer the correct typing scheme to use by scanning the assembly and subsequently identify the allele variant found.

ii. Antimicrobial resistance (AMR) calling

ResFinder is used to identify genes/SNVs associated with AMR in your assembly. Assemblies of any species will be searched for the detection of acquired resistance genes, however SNVs conferring resistance are only available to a few well characterised species/genera. These are:

Campylobacter spp.
Enterococcus faecalis
Enterococcus faecium
Escherichia coli
Helicobacter pylori
Klebsiella spp.
Mycobacterium tuberculosis
Neisseria gonorrhoeae
Salmonella spp.
Staphylococcus aureus

The species/genera of your assembly will be detected from the results of the MLST step and SNV will be selected automatically if applicable.

Troubleshooting

If the workflow fails please run it with the demo data set to ensure the workflow itself is working. This will help us determine if the issue is related to the environment, input parameters or a bug.
See how to interpret some common nextflow exit codes here.

FAQ's

No results for multi-locus sequence typing?

This usually occurs if the assembly is incomplete and does not have sufficient coverage to identify the house keeping genes of the typing scheme. Another, rarer scenario is if the assembly is from an organism with no typing scheme. A list of the available typing schemes can be found here. In both scenarios, AMR calling will still be performed but only for acquired resistance genes.

If your question is not answered here, please report any issues or suggestions on the github issues page or start a discussion on the community.

bawee/wf-bacterial-genomes