bdring/midTbot_esp32

Issues

• Problems with hr4988 stepper drivers

  #29 opened 3 years ago by J-Wrobel
  0

• No Pen Lift in Z0 .. Z5 range

  #26 opened 4 years ago by scruss
  14

• Shorter mounting screws required for specified stepper motors

  #28 opened 4 years ago by graumannteague
  0

• Limit switches

  #27 opened 4 years ago by dunkfordyce
  4

• Servo setup instructions inconsistent

  #25 opened 4 years ago by scruss
  0

• GrabCAD interactive model not working

  #21 opened 5 years ago by mahtDFR
  3

• File types and software are suitable

  #24 opened 5 years ago by admin-kepo
  0

• New Controller Revision

  #17 opened 5 years ago by bdring
  1

• Missing stepper motor drivers from BOM

  #23 opened 5 years ago by ejo4041
  0

• Alternative to the 5V DC-DC Power Supply

  #12 opened 5 years ago by bdring
  5

• sdcard

  #22 opened 5 years ago by vascobarbosa
  5

• How to setup bluetooth?

  #19 opened 5 years ago by BigDave365
  3

• Pen is lowered onto the paper after homing

  #13 opened 5 years ago by Kartoffel
  6

• Absolutely PHENOMENAL project!

  #1 opened 5 years ago by MHeyster
  7

• Update BOM / ease procuring of stepper motors

  #10 opened 5 years ago by dirkx
  2

• plot file(s) with push button(s) ?

  #18 opened 5 years ago by snug11
  2

• Improvement request: labeling of stepper motors

  #5 opened 5 years ago by dirkx
  4

• Improvement request: labeling of DC/DC pins

  #7 opened 5 years ago by dirkx
  3

• Width of the ESP32 Dev kit (0.96)

  #4 opened 5 years ago by dirkx
  9

• Improvement request: screw terminal

  #8 opened 5 years ago by dirkx
  5

• Suggestion - heavier set-screw pen

  #16 opened 5 years ago by dirkx
  1

• No ESP32 chip listed in the BOM

  #14 opened 5 years ago by dwightmulcahy
  5

• Unstable Y axis

  #15 opened 5 years ago by Kartoffel
  2

• midTbot Controller Kits on Tindie

  #11 opened 5 years ago by bdring
  0

• Limit Switch Sourcing

  #2 opened 5 years ago by bdring
  3

• Feature/improvement: through the hole capacitors

  #6 opened 5 years ago by dirkx
  2

• Idler sizing

  #3 opened 5 years ago by dirkx
  4

• patch - some minor instruction updates

  #9 opened 5 years ago by dirkx
  1