Absolutely PHENOMENAL project!

Question

Absolutely PHENOMENAL project!

MHeyster opened this issue 5 years ago · 7 comments

Just wanted to drop a message and say that this is an incredible project, it is extremely well implemented. I'd love to collaborate on the hardware side of you'd be up for it? Send me a message!

Answer 1 · 2019-08-05T20:00:04.000Z

What did you have in mind? We can discuss here or via my Slack

BTW: I am on vacation in Colorado and will be off grid a lot.

Answer 2 · 2019-08-13T14:12:51.000Z

Hi, I went ahead and had the PCB made by PCBGOGO in China. They came out great. Obviously they don't just fabricate 1 board, so I ordered the minimum of 5. I want to build one of these each for me and my daughter and keep a spare. Can I donate the other two boards to you or anyone you know deserving of this? Attached are some pictures. I can mail them out. Now, just to collect the other parts for it. Thanks for the contribution. On Monday, August 5, 2019, 05:30:06 p.m. NDT, bdring <notifications@github.com> wrote: What did you have in mind? We can discuss here or via my Slack BTW: I am on vacation in Colorado and will be off grid a lot. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

Answer 3 · 2019-08-13T14:13:11.000Z

J.J. Gerber 43 Hollyberry Drive Paradise, NL, A1L 4A1 Canada Phone: +1 (709) 749-1612 E-mail: jjgerber01@yahoo.ca On Monday, August 5, 2019, 05:30:06 p.m. NDT, bdring <notifications@github.com> wrote: What did you have in mind? We can discuss here or via my Slack BTW: I am on vacation in Colorado and will be off grid a lot. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

Answer 4 · 2019-08-13T16:24:22.000Z

Have you found a source for https://www.digikey.com/short/p993q4 All the suppliers I've tried are out of stock, and it looks like they only plan to get parts around Dec 26, 2019. Also, is there a photograph of the board I can use as reference to figure out where the parts are supposed to go? Mfg Part Number: D2FS-FL-N-A Customer PO Number: Backorder Qty: 10 Ship Method: FEDX GROUND *Original Delivery Date** *Qty* *Revised Delivery Date** *Qty* *12/4/2019* 10 *12/26/2019* 10

…

On Tue, Aug 13, 2019 at 9:13 AM jjgerber01 ***@***.***> wrote: J.J. Gerber 43 Hollyberry Drive Paradise, NL, A1L 4A1 Canada Phone: +1 (709) 749-1612 E-mail: ***@***.*** On Monday, August 5, 2019, 05:30:06 p.m. NDT, bdring < ***@***.***> wrote: What did you have in mind? We can discuss here or via my Slack BTW: I am on vacation in Colorado and will be off grid a lot. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1?email_source=notifications&email_token=AAGLMTI3QYBRDMHXAHD2M4TQEK6PPA5CNFSM4II7NJ22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD4FZGGY#issuecomment-520852251>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAGLMTLNVEQAFVD3SVIXYCTQEK6PPANCNFSM4II7NJ2Q> .

Answer 5 · 2019-08-13T16:54:30.000Z

I had the same problem, but this one matches mechanically. I hope it matches electrically too. You will have to solder some stiff wires inot the PCB and then attach the pins of this switch. The bolt holes aligh well. I inlcuded some pictures with a ruler frm the PCB I had made. Gikfun Micro Switch Long Hinge Lever (Pack of 20pcs) forArduino EK1713 by Gikfun_Official_Store Learn more:https://www.amazon.ca/dp/B06XMQG4TC/ref=cm_sw_em_r_mt_dp_U_pKUuDbDW6YA32 I hope this helps J.J. Gerber 43 Hollyberry Drive Paradise, NL, A1L 4A1 Canada Phone: +1 (709) 749-1612 E-mail: jjgerber01@yahoo.ca On Tuesday, August 13, 2019, 01:54:24 p.m. NDT, PaulHaeberli <notifications@github.com> wrote: Have you found a source for https://www.digikey.com/short/p993q4 All the suppliers I've tried are out of stock, and it looks like they only plan to get parts around Dec 26, 2019. Also, is there a photograph of the board I can use as reference to figure out where the parts are supposed to go? Mfg Part Number: D2FS-FL-N-A Customer PO Number: Backorder Qty: 10 Ship Method: FEDX GROUND *Original Delivery Date** *Qty* *Revised Delivery Date** *Qty* *12/4/2019* 10 *12/26/2019* 10

On Tue, Aug 13, 2019 at 9:13 AM jjgerber01 ***@***.***> wrote: J.J. Gerber 43 Hollyberry Drive Paradise, NL, A1L 4A1 Canada Phone: +1 (709) 749-1612 E-mail: ***@***.*** On Monday, August 5, 2019, 05:30:06 p.m. NDT, bdring < ***@***.***> wrote: What did you have in mind? We can discuss here or via my Slack BTW: I am on vacation in Colorado and will be off grid a lot. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1?email_source=notifications&email_token=AAGLMTI3QYBRDMHXAHD2M4TQEK6PPA5CNFSM4II7NJ22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD4FZGGY#issuecomment-520852251>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAGLMTLNVEQAFVD3SVIXYCTQEK6PPANCNFSM4II7NJ2Q> .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

Answer 6 · 2019-08-13T17:24:28.000Z

I started a new issue to discuss sourcing the switch.

@jjgerber01

Answer 7 · 2019-08-13T23:27:50.000Z

@jjgerber01 if you still have PCBs to spare i'd be interested in buying one or two off you

@bdring great project! thanks for sharing