Are alternate colors available for the JST connectors?
Opened this issue · 4 comments
Migrated from jadonk#28 (comment)
Originally created by @cstiegman on Tue, 15 Nov 2016 19:05:34 GMT
Got it - thanks!
Migrated from jadonk#28 (comment)
Originally created by @jadonk on Tue, 15 Nov 2016 17:33:55 GMT
If the only secondary color we have is black, let's use white on everything except using black on PWR and ADC. Those are the ones most likely to damage something if connected mistakenly.
Migrated from jadonk#28 (comment)
Originally created by @erikwelsh on Tue, 01 Nov 2016 19:09:48 GMT
Here is the color scheme for the connectors:
2 pin
M1-4: (4x) white
3 pin
DSM2: (1x) white
4 pin
E1-4, I2C: (5x) white
UT0, UT1, UT5: (3x) black
PWR: (1x) new color #1 (red preferred)
CAN: (1x) new color #2 (green preferred)
6 pin
S1.1, S1.2: (2x) white
GP0-1: (2x) black
ADC: (1x) new color #1 (red preferred)
GPS: (1x) new color #2 (green preferred)
Unfortunately, the colored connectors are a 50% premium over the other connectors so one goal of the above scheme was to minimize the number of colored connectors.
Migrated from jadonk#28 (comment)
Originally created by @winsurfwon on Fri, 16 Mar 2018 22:27:11 GMT
Is there a list of all male connectors for all the BB Blue, and is there any MFG that actually sell a set of them minus the power connectors and USB. It is well specified in the glossy print, but not the actual male mfg connector lead part numbers if one exists. I called a few but they were not ready for it. So good so far.