beagleboard/beaglebone-blue

Issues

• BBB GPIO and libgpiod

  #59 opened a year ago by ZygaOGC
  0

• [Help Wanted] BeagleBone Blue Does Not Turn On (No LEDs nor USB Detection)

  #58 opened 2 years ago by TiberiusDreadnought
  2

• Amperage consumption when operating on battery

  #57 opened 2 years ago by manbehindthemadness
  0

• Please add one-liner module test for IMU and Barometer!

  #54 opened 4 years ago by dmalawey
  0

• Add PDFs

  #51 opened 4 years ago by jadonk
  3

• MPU 9250 via SPI

  #43 opened 4 years ago by jadonk
  7

• Do we keep WL1835 or move to WL1831?

  #39 opened 4 years ago by jadonk
  2

• Drivers of the motors are insufficiently protected for over-current

  #38 opened 4 years ago by jadonk
  0

• Battery drains when power is disabled

  #42 opened 4 years ago by jadonk
  0

• Need spec on conformal coating

  #49 opened 4 years ago by jadonk
  4

• Adjust to fit in Altoid's tin

  #50 opened 4 years ago by jadonk
  10

• Wrong voltage on JST connectors ?

  #35 opened 4 years ago by jadonk
  0

• Pin table needs to be updated

  #36 opened 4 years ago by jadonk
  0

• Increase size of text

  #37 opened 4 years ago by jadonk
  2

• eMMC/SD card goes into read only mode

  #40 opened 4 years ago by jadonk
  0

• Getting Started

  #44 opened 4 years ago by jadonk
  7

• Are alternate colors available for the JST connectors?

  #52 opened 4 years ago by jadonk
  4

• The two black JST-SH connectors don't have a retention bed, unlike the white JST-SH connectors

  #45 opened 4 years ago by jadonk
  0

• Convert client port to OTG

  #47 opened 4 years ago by jadonk
  2

• Beaglebone Blue: Pull PWM Pins Low on Boot

  #46 opened 4 years ago by jadonk
  0

• Update to use lower-cost battery management

  #48 opened 4 years ago by jadonk
  0

• WiFi antenna attachment

  #41 opened 4 years ago by jadonk
  0

• The two black JST-SH connectors don't have a retention bed, unlike the white JST-SH connectors

  #33 opened 5 years ago by dorovl
  4

• WiFi antenna attachment

  #32 opened 5 years ago by dorovl
  1

• Drivers of the motors are insufficiently protected for over-current

  #34 opened 5 years ago by dorovl
  1

• Blue will not generate a WiFi AP on boot

  #24 opened 5 years ago by dmalawey
  2

• Plug 3dr via usb

  #31 opened 5 years ago by skibinalexander
  1

• how to use config-pin beaglebone blue

  #30 opened 5 years ago by wolsue
  0

• Beaglebone Blue System Reference Manual

  #5 opened 7 years ago by bluefix
  5

• MPU9250 IMU temperature intended purpose?

  #25 opened 5 years ago by dmalawey
  1

• How to boot from MicroSD vs onboard memory - need instructions

  #23 opened 5 years ago by dmalawey
  2

• buster alpha image no battery monitor

  #29 opened 5 years ago by dlech
  3

• How to use GPIO1_25?

  #28 opened 5 years ago by WYXF007
  0

• How to assign static ip

  #27 opened 5 years ago by wangyuanzhengbighead
  0

• beaglebone-blue with NodeMCU

  #20 opened 5 years ago by kevin-armel
  3

• Identification of motor driver pins

  #26 opened 5 years ago by dmalawey
  2

• Losing Connection with Satellite DSMX recv

  #21 opened 5 years ago by prashinz
  2

• how to use PRU-ICSS uart to send/receive data?

  #22 opened 5 years ago by wangyuanzhengbighead
  0

• Beaglebone blue doesn't light any led

  #19 opened 5 years ago by emejoti
  0

• BeagleBone_Blue_ShortSpec.docx != BeagleBone_Blue_ShortSpec.pdf

  #18 opened 6 years ago by TinyTheBrontosaurus
  0

• Disable serial debug console on `/dev/ttyS0`

  #17 opened 6 years ago by galou
  0

• Wrong Inductor in BOM

  #16 opened 6 years ago by pamirmundt
  0

• BB-BLACK x BB-BLACK WIFI

  #15 opened 6 years ago by xalbornoz
  2

• It is possible to use BB Blue with stepper motor driver ?

  #14 opened 6 years ago by alkabal
  1

• Looks like there are some errors

  #4 opened 7 years ago by csann
  2

• Connection Refused 443

  #7 opened 7 years ago by oscarjgv24
  4

• Motor driver chip is mislabelled

  #8 opened 7 years ago by ElhemEnohpi
  1

• BeagleBone Blue doesn't save config

  #12 opened 7 years ago by BluePackStack
  3

• Suggestion: mention motor driver specs in spec sheet

  #9 opened 7 years ago by ElhemEnohpi
  4

• Thermal management

  #6 opened 7 years ago by Russ76
  1